Sony HDR UX1 Operating Guide - Page 111
Recording, The flash does not work.
UPC - 027242698918
View all Sony HDR UX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Recording Refer also to "Adjusting the image during recording" (p. 113). Pressing START/STOP does not record movies on the disc. • The playback screen is displayed. Set your camcorder to recording standby (p. 42). • Your camcorder is recording the scene you have just shot on the disc. • The disc has run out of space. Use a new disc or format the disc (DVD-RW/DVD+RW only, p. 76). Or delete the unnecessary images (p. 58). • When you are using one of the following discs after finalizing it, make the disc to be able to record additional scenes (p.78). Or use a new disc. - DVD+RW - DVD-RW recorded with HD (high definition) image quality - DVD-RW (VR mode) recorded with SD (standard definition) image quality • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for about 1 hour in a cool place (p. 136). You cannot record a still image. • The playback screen is displayed. Set your camcorder to recording standby (p. 42). • Release the lock on the write-protect tab of the "Memory Stick Duo" if there is one (p. 132). • The "Memory Stick Duo" has run out of space. Use a new "Memory Stick Duo" or format the "Memory Stick Duo" (p. 77). Or delete the unnecessary images (p. 59). • You cannot record a still image together with: - [SMTH SLW REC] - [FADER] - [D.EFFECT] - [PICT.EFFECT] • You cannot record a still image on a disc on your camcorder. Troubleshooting The ACCESS lamp lights up even when you stop recording. • Your camcorder is recording the scene you have just shot on the disc. The recording angle differs depending on the POWER switch setting position. • The recording angle for the still image is wider than the one for the movie. The shutter sound is not heard when you record a still image. • Set [BEEP] to [ON] (p. 89). • The shutter does not sound when using the Dual Rec function. The flash does not work. • You cannot record with the flash with: Continued , 111