Sony HDR UX1 Operating Guide - Page 34
Step 4: Adjusting the LCD panel and viewfinder, LCD panel
UPC - 027242698918
View all Sony HDR UX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Step 3: Turning the power on (Continued) To turn off the power Slide the POWER switch to OFF (CHG). b Notes • It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time. • The lens cover opens automatically when the power is turned on. It closes when the playback screen is selected, or the power is turned off. • In the setting at the time of purchase, the power turns off automatically if you leave your camcorder without any operation attempted for approximately 5 minutes, to save battery power ([A.SHUT OFF], p. 92). Step 4: Adjusting the LCD panel and viewfinder LCD panel Open the LCD panel 90 degrees to the camcorder (1), then rotate it to the best angle to record or play (2). 290 degrees (max.) DISP/BATT INFO 2180 degrees (max.) 190 degrees to the camcorder To turn off the LCD backlight to make the battery last longer Press and hold DISP/BATT INFO for a few seconds until appears. This setting is practical when you use your camcorder in bright conditions or you want to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/ BATT INFO for a few seconds until disappears. To hide the screen indicators Press DISP/BATT INFO to toggle the screen indicators (such as time code) on or off. b Notes • Do not press the buttons below the LCD screen accidentally when you open or adjust the LCD panel. 34