Sony HDR-XR160 Handycam® Handbook - Page 105
Copying/Connecting to other, devices, Connecting to a computer, of the screen of the 4:3 TV. - video of how to work a
UPC - 027242820081
View all Sony HDR-XR160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Table of Contents Enjoy Useful Functions Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images. When you are using the S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 34). The top, bottom, right, and left edges of images are trimmed slightly on a connected TV. The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. It is recommended you record images using the outer frame of [Guide Frame] (p. 86) as a guide. The image appears distorted on the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV Type] correctly (p. 92) and play back the image. Black bands appear at the top and bottom of the screen of the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction. The images being played back do not appear on the LCD screen when you connect the camcorder to a TV and play back images. Highlight Playback or a scenario will not appear on the LCD screen of the camcorder while it is connected to a TV and play back images. Copying/Connecting to other devices Images are not copied correctly. You cannot copy images using the HDMI cable (sold separately). The A/V connecting cable is not connected properly. Make sure to connect the cable to the input jack of another device (p. 71). Connecting to a computer "PMB" cannot be installed. Check the computer environment or installation procedure required to install "PMB." "PMB" does not work correctly. Quit "PMB" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the Built-in USB Cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. When both the Built-in USB Cable and the USB jack of the camcorder are connected to the external devices at the same time, disconnect one that is not connected to a computer. Index US 105