Sony HT-SS380 Operating Instructions - Page 30
In case of poor FM stereo, reception, If a wrong frequency is entered, If you cannot tune to a station
UPC - 027242808317
View all Sony HT-SS380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Tuning to a station automatically (Automatic Tuning) 1 Press TUNER. 2 Press TUNING + or TUNING -. TUNING + scans from lower to higher frequency stations and TUNING - for scanning higher to lower. The receiver stops scanning whenever a frequency is received. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display panel, select monaural audio to lessen the sound distortion. 1 Press AMP MENU. 2 Press V/v repeatedly until "TUNER" appears, then press or b. 3 Press V/v repeatedly until "FM MODE" appears, then press or b. 4 Press V/v repeatedly until "MONO" appears, then press . To return to stereo mode, repeat steps 1 to 4 and select "STEREO" in step 4. Tip To improve reception, reorient the supplied FM wire antenna (aerial). Tuning to a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons. 1 Press TUNER. 2 Press D.TUNING. 3 Hold down SHIFT, then press the numeric buttons to enter the frequency. Example: FM 102.50 MHz Select 1 b 0 b 2 b 5 4 Hold down SHIFT, then press ENTER. If a wrong frequency is entered "FM ---.--" appears and then the display returns to the current frequency. If you cannot tune to a station Make sure you have entered the right frequency. Try repeating steps 2 to 4. If you still cannot tune in a station, the frequency may not be in use in your area. 30US