Sony HT-SS380 Operating Instructions - Page 32

Naming preset station 1 Press TUNER. 2 Tune to the preset station you want to create an index name for (page 31). 3 Press AMP MENU. 4 Press V/v repeatedly until "TUNER" appears, then press or b. 5 Press V/v repeatedly until "NAME IN" appears, then press or b. The cursor flashes and you can select a character. 6 Press V/v to select a character, then press B/b to move the input position backward and forward. You can enter up to 8 characters to name the station. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. If you enter a wrong character Press B/b until the character to be changed flashes, then press V/v to select the desired character. 7 Press . The name you entered is registered. Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver's pre-programmed sound fields. .X x> SOUND FIELD +/- Press SOUND FIELD +/- repeatedly to select the sound field you want. You can also use SOUND FIELD on the receiver. 2 channel sound mode You can switch the output sound to 2 channel sound regardless of the recording formats of the software you are using, the playback equipment connected, or the sound field settings of the receiver. x 2CH ST. (2 Channel Stereo) The receiver outputs the sound from the front left/right speakers and the subwoofer only. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel except LFE signals. Auto Format Direct (A.F.D.) mode The Auto Format Direct (A.F.D.) mode allows you to listen to high fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. 32US