Sony MVC-CD500 Operating Instructions - Page 106
Others, The lens does not move
View all Sony MVC-CD500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Others Symptom Your camera does not work. The power is on, but the camera does not work. You cannot identify an indicator on the screen. The lens gets fogged. The lens does not move when you turn off the camera. A file error occurs when you play back a file. Cause • You are not using an "InfoLITHIUM" battery pack. • The battery level is low. (The E indicator appears.) • The AC Adaptor is not connected securely. • The built-in microcomputer is not working properly. - • Moisture condensation has occurred. • The battery pack is discharged. • The image file has an error. • The image was not recorded correctly. • The disc is dirty. • The disc may be scratched. Solution p Use an "InfoLITHIUM" battery pack (page 121). p Charge the battery pack (page 11). p Connect it securely to the DC IN jack of your camera and to a wall outlet (page 14). p Disconnect, and then, after one minute, reconnect all power sources and turn on the camera. If this does not work, press the RESET button on the bottom of the camera with a pointed object, then turn the power on again. (This will clear the date and time settings, etc.) p Check the indicator (page 125). p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 120). p Replace it with a charged battery pack or use the AC Adaptor (pages 11 and 14). - - p Clean the disc (page 120). p Replace the disc. 106