Sony MVC-CD500 Operating Instructions - Page 78

• If you mark an image shot in TIFF mode with a print (DPOF) mark, only the uncompressed (TIFF) image is printed, and the JPEG image recorded at the same time is not printed. • If you mark an image with a print mark, the disc remaining space will decrease. If you unmark the print mark, the disc remaining space will also decrease. • If the disc remaining space is not sufficient, you may not be able to mark an image with a print mark. • Make sure to finalize the disc before having images printed at a shop that supports the DPOF standard (page 85). In single-image mode a Set the mode dial to . b Display the image you want to mark with b/B. c Press MENU. The menu appears. d Select [DPOF] with b/B, then press z. The mark is marked on the displayed image. 60min VGA 101 2/9 DPOF Exit OK BACK/NEXT e To continue and mark other images, display the desired image with b/B, then press z. To unmark the mark Press z again in step 4 or 5. The mark disappears. 78 In index (nine-image) mode a Set the mode dial to , then press the zoom W (index) to display the index (nine-image) screen. b Press MENU. The menu appears. c Select [DPOF] with B, then press z. d Select [Select] with b/B, then press z. • When marking marks, you cannot select [All In Folder]. e Select the image you want to mark with v/V/b/B, then press z. The green mark appears on the selected image. SELECT MOVE MENU TO NEXT f Repeat step 5 to mark other images.