Sony MVC-CD500 Operating Instructions - Page 19
Initializing a disc, What is initialization? - lcd cover
View all Sony MVC-CD500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Shooting still images Initializing a disc What is initialization? Initialization is required to record images on a disc. When you perform finalization (page 85) using your camera to view images through a CD-ROM drive, initialization is also automatically performed, and you can continue to record images. Images recorded before finalization remain on the disc. Mode dial 1 , Insert a new disc and set the mode dial to , then turn on the power. "Initialize Place on level surface" appears on the LCD screen. To cancel initialization Select [Cancel] with V on the control button, then press z. After canceling the initialization, open and close the disc cover, then perform the procedure from step 1. • You can also carry out this operation when the mode dial is set to P, S, A, M, SCN or . • You can also perform initialization using 1 (Disc Tool 1) in the SET UP settings (page 117). Initialize Avoid any vibration Ready to initialize Initialize Avoid any vibration Initialize in progress Initialize Initialize complete 2 , Select [OK] with v on the control button, then press z. Initialization starts. Do not shake or strike the camera during initialization. 19