Sony MVCCD300 Operating Instructions - Page 76
Viewing images on a TV screen, Set the TV/VIDEO, switch to, VIDEO, connecting, cable, to A/V OUT MONO
UPC - 027242589223
View all Sony MVCCD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Viewing images on a TV screen Mode dial: Before connecting your camera, be sure to turn off the TV. Set the TV/VIDEO switch to "VIDEO". A/V connecting cable to A/V OUT (MONO) jack 1 Connect the A/V connecting cable to the A/V OUT (MONO) jack of your camera and to the audio/video input jacks of the TV. If your TV has stereo type input jacks, connect the audio plug (black) of the A/V connecting cable to the Lch jack. 2 Turn on the TV and start playback on your camera. The playback image appears on the TV screen. Notes • You cannot use a TV that has an antenna (aerial) connector only. • When viewing a still image on the TV, the black band may appear around the image. 76
76
Viewing images on a
TV screen
Mode dial:
Before connecting your camera, be
sure to turn off the TV.
Notes
•
You cannot use a TV that has an antenna
(aerial) connector only.
•
When viewing a still image on the TV, the
black band may appear around the image.
1
Connect the A/V connecting
cable to the A/V OUT (MONO)
jack of your camera and to
the audio/video input jacks of
the TV.
If your TV has stereo type input
jacks, connect the audio plug
(black) of the A/V connecting
cable to the Lch jack.
2
Turn on the TV and start
playback on your camera.
The playback image appears on the
TV screen.
Set the TV/VIDEO
switch to
“
VIDEO
”
.
A/V
connecting
cable
to A/V OUT (MONO)
jack