Sony MVCCD300 Operating Instructions - Page 99
The AC power adaptor is not connected., Connect the power cord firmly to a wall outlet
UPC - 027242589223
View all Sony MVCCD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Symptom The indication of the battery remaining time is not proper, or the power is immediately turned off even if the battery remaining indicator indicates that the battery level is sufficient. The /CHG lamp flashes when charging a battery pack. The /CHG lamp does not light up when charging a battery pack. No function works though the power is on. Cause and/or Solution • You are using the camera for many hours under extremely hot or cold temperatures. • The battery pack is dead. tReplace the battery pack with a new one (page 9). • The battery level is too low. tInstall the fully charged battery pack (page 9, 10). • A deviation has occurred in the remaining battery time. tCharge the battery pack fully (page 10). • A malfunction has occurred in the battery pack. tContact your Sony dealer or local authorized Sony service facility. • The AC power adaptor is not connected. tConnect the power cord firmly to a wall outlet (mains) (page 10). • The battery pack is not installed properly. tInstall it properly (page 9). • Charging of the battery pack is complete. •- tRemove the battery pack, then install it again after about one minute. If the function still do not work, press the reset button located on the bottom using a sharp-pointed object. (If you press the reset button, the date and time setting is cleared.) Additional information 99