Sony SA-NS500 Operating Instructions - Page 16
To set the standby mode, To resume power from the, network standby mode or the, standby mode
View all Sony SA-NS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Notes • Keep this unit in the network standby mode so it can be controlled from a controller even when you are not currently operating this unit. • The unit enters the selected standby mode when it is idle for 30 minutes. If the unit is being discharged and it is idle for another 30 minutes in the network standby mode, the unit enters another standby mode that saves the battery life. Tips • The STANDBY MODE switch is set to STANDBY in the factory default settings. • The unit can be controlled from the controller on your network, etc., when the unit is in the network standby mode. The unit turns on automatically when the controller delivers audio content to this unit. To set the standby mode To resume power from the network standby mode or the standby mode Press ?/1 (on/standby) on the remote control. You can also use the ?/1 (on/standby) button on the unit. The ?/1 (on/standby) indicator lights up in green and the illumination indicator lights up. To turn the unit off Set the OPERATE ON/OFF switch to OFF when you need to turn the unit off, such as when you do not use for a long time. When the unit is not connected to the AC adaptor, set the OPERATE ON/OFF switch to OFF in order to avoid discharging the battery. 1 Set the STANDBY MODE switch to STANDBY. 2 Press the ?/1 (on/standby) button. The ?/1 (on/standby) indicator lights up in red. Note You cannot operate this unit via a home network when the unit is in the standby mode. Set the unit to the network standby mode when you want to operate the unit via a home network. 16GB