Sony SA-NS500 Operating Instructions - Page 20
Option 3: PIN method, Click [My Network] or [Network]
View all Sony SA-NS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4 Press the WPS button on the unit for three seconds. The LINK indicator lights up in green when the connection is made. Option 3: PIN method Your computer must be connected to the wireless LAN router/access point in advance. Write down the SSID of your wireless LAN router/access point. SSID Refer to the operating instructions of the access point. 1 Check whether your computer and wireless LAN router/ access point are turned on. 2 Connect the unit and the wireless LAN router/access point using a network (LAN) cable. [SA-NS500] or the browser does not open even if you double-click [SA-NS500] on screen of your computer. • Restart your computer if you cannot find [SA-NS500]. 5 Select the desired language when the "Language Setup" screen appears. 6 Select [Network Settings] from the menu. 7 Enter the SSID of your access point. Enter the SSID. Refer to the memo that you wrote for this information. Network (LAN) cable 3 Turn the unit on. 4 Click [My Network] or [Network] t [SA-NS500]. The [Sony Network Device Setting] screen appears. Notes • Install the UPnP service in advance if you are using Windows XP (page 35). • Refer to "Setting Screen on the Browser" (page 34) for details on the display of [My Network] or [Network]. • Check your set-up of the firewall of the security software if you cannot find 20GB