Sony SA-NS500 Operating Instructions - Page 37

Specifications, AUDIO POWER, Wireless LAN Inputs/Outputs, General - watts

Get Sony SA-NS500 PDF manuals and user guides View all Sony SA-NS500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: Tweeter L+R With 5 ohms loads, both channels driven, from 500 - 20 kHz; rated 10 watts per channels minimum RMS power, with no more than 1 % total harmonic distortion from 1 watts to rated output. Power Output (reference): Tweeter L+R 12 W + 12 W (5 ohms, 1 kHz, THD 10%) Woofer 12 W (6 ohms, 100 Hz, THD 10%) Wireless LAN section Compatible standards: IEEE 802.11 b/g (WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/WPA2-PSK (TKIP)) Radio frequency: 2.4 GHz Inputs/Outputs Speakers Tweeter Approx. 30 mm (1 3/16 in) diameter × 4 Woofer Approx. 110 mm (4 3/8 in) diameter × 1 AUDIO IN jack: Stereo mini jack Voltage: 1.0 V Network port: 10BASE-T/100BASE-TX (Auto Polarity) General Operating temperature: 0°C - 40°C (32 °F - 104 °F) Power requirements: AC adaptor Input: 120-240V AC, 50/60Hz Output: DC18V 2.6A Power consumption: When the unit is on: DC18V 1.3A When the unit in the standby mode: 0.5W or below When the unit in the network standby mode: 4.0W or below Battery life: Maximum volume level (30): Approx. 2 hours Half volume level (15): Approx. 5 hours Charging time: When the unit in the network standby/standby mode: Approx. 3 hours When the unit is on: Approx. 5 hours Dimensions (w/h/d) (including projecting parts and controls): Approx. 241 × 325 × 241 mm (Approx. 9 1/2 × 12 7/8 × 9 1/2 in) Mass Approx. 4.2 kg (9 lb 4 oz) Supplied accessories: See page 14. Design and specifications are subject to change without notice. Others 37GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
37
GB
Others
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Tweeter L+R
With 5
ohms loads, both channels driven, from
500 - 20 kHz;
rated 10 watts per channels minimum RMS
power, with no more than 1 % total harmonic
distortion from 1 watts to rated output.
Power Output (reference):
Tweeter L+R 12 W + 12 W (5 ohms, 1 kHz,
THD 10%)
Woofer 12 W (6 ohms, 100 Hz, THD 10%)
Wireless LAN section
Compatible standards:
IEEE 802.11 b/g
(WEP 64 bit, WEP 128 bit,
WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP))
Radio frequency:
2.4 GHz
Inputs/Outputs
Speakers
Tweeter Approx. 30 mm (1 3/16 in) diameter × 4
Woofer Approx. 110 mm (4 3/8 in) diameter × 1
AUDIO IN jack:
Stereo mini jack
Voltage: 1.0 V
Network port:
10BASE-T/100BASE-TX (Auto Polarity)
General
Operating temperature:
0°C - 40°C (32 °F - 104 °F)
Power requirements:
AC adaptor
Input: 120-240V AC, 50/60Hz
Output: DC18V 2.6A
Power consumption:
When the unit is on: DC18V 1.3A
When the unit in the standby mode:
0.5W or below
When the unit in the network standby mode:
4.0W or below
Battery life:
Maximum volume level (30): Approx. 2 hours
Half volume level (15): Approx. 5 hours
Charging time:
When the unit in the network standby/standby
mode: Approx. 3 hours
When the unit is on: Approx. 5 hours
Dimensions (w/h/d) (including
projecting parts and controls):
Approx. 241 × 325 × 241 mm
(Approx. 9 1/2 × 12 7/8 × 9 1/2 in)
Mass
Approx. 4.2 kg (9 lb 4 oz)
Supplied accessories:
See page 14.
Design and specifications are subject to
change without notice.