Sony SA-NS500 Operating Instructions - Page 8

Getting Started, Guide to Parts and Controls, Main unit

Page 8 highlights

Getting Started Guide to Parts and Controls Main unit Top A Handle Use this handle when you carry the unit. B CHG/BATT indicator Indicates the charging status of the unit (page 14). Green: The unit is being discharged. Amber: The unit is being discharged and the battery is low. Red: The unit is being charged. Not lit: The unit is full charged. Tip When the unit is fully charged, you can use it for playback for approximately 2 hours at the maximum volume level. You can use it for playback for approximately 5 hours at a volume level of 15 (of max 30). 8GB C ?/1 (on/standby) button, indicator Press to switch between power on and the standby mode currently selected (page 15). Indicates the power status of the unit (page 15). Green: The unit is turned on. Amber: The unit is in the network standby mode. Red: The unit is in the standby mode. Not lit: The unit is turned off. Note You cannot operate this unit via a home network when the unit is in the standby mode or the OPERATE ON/OFF switch is set to OFF. Set the unit to the network standby mode when you

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

8
GB
Guide to Parts and Controls
Top
A
Handle
Use this handle when you carry the unit.
B
CHG/BATT indicator
Indicates the charging status of the unit
(page 14).
Green: The unit is being discharged.
Amber: The unit is being discharged and
the battery is low.
Red: The unit is being charged.
Not lit: The unit is full charged.
Tip
When the unit is fully charged, you can use it for
playback for approximately 2 hours at the
maximum volume level. You can use it for
playback for approximately 5 hours at a volume
level of 15 (of max 30).
C
?
/
1
(on/standby) button, indicator
Press to switch between power on and the
standby mode currently selected (page 15).
Indicates the power status of the unit
(page 15).
Green: The unit is turned on.
Amber: The unit is in the network standby
mode.
Red: The unit is in the standby mode.
Not lit: The unit is turned off.
Note
You cannot operate this unit via a home network
when the unit is in the standby mode or the
OPERATE ON/OFF switch is set to OFF. Set
the unit to the network standby mode when you
Getting Started
Main unit