Sony STR-DA3700ES Operating Instructions - Page 123
Setting remote control codes that are not stored in the remote control, To cancel programming
View all Sony STR-DA3700ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Using the Remote Control Program the sequence of the operation 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP. The RM SET UP button flashes and one of the input buttons lights up (as the factory default setting, the BD/DVD button lights). 2 Press the input button for the equipment for which you want to program the sequence of operation(s). 3 Press the buttons you want to program in the same sequence as you want the operation(s) to be performed. You can program particular operations using the following buttons. Press Operations to be programmed The input Switches inputs. button for more than 1 second MACRO 1 or MACRO 2 Make a one second interval. When you want to make a longer interval, press MACRO 1 or MACRO 2 repeatedly. The input button selected in step 2 flashes twice, then lights up again. 4 Repeat steps 2 and 3 when you want to program operations for other equipment. 5 Press RM SET UP to finish the programming process. To cancel programming Not pressing any button for 60 seconds cancels the settings. The previous command remains valid. Starting macro play 1 Press AMP. The AMP button lights up, and then turns off. 2 Press MACRO 1 or MACRO 2 to start the macro. The macro starts and execute the commands in the order you assigned them. While the commands are being sent, the AMP button flashes and the RM SET UP button lights up. When the commands have been sent, the RM SET UP and AMP buttons turn off. To erase a programmed macro 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP to clear the stored macro. The RM SET UP button flashes. 2 Press RM SET UP. Settings stored as macro are cleared. Setting remote control codes that are not stored in the remote control Even if a remote control code is not one of the presets stored in the remote control, it is possible for the remote control to learn the code using the learning function. continued 123US