Sony STR-DA3700ES Operating Instructions - Page 80
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through), Pass Through
View all Sony STR-DA3700ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
You can also operate this function using the TV menu. For details, refer to the operating instructions of the TV. Notes • When "Control for HDMI" is set to "On," the "Audio Out" settings in the HDMI Settings menu will set automatically based on the System Audio Control settings. • If the TV is turned on before turning on the receiver, the TV will momentarily loose the sound output. Audio Return Channel (ARC) If the TV is compatible with the Audio Return Channel (ARC), an HDMI cable connection also sends a digital audio signal from the TV to the receiver. You do not need to make a separate audio connection for listening to TV sound from the receiver. For details, see "Switching between digital and analog audio" (page 81). Scene Select The optimum picture quality and sound field are selected automatically according to the scene selected on your TV. For details on the operation, refer to the operating instructions of the TV. Note The sound field may not switch depending on the TV. Correspondence table Scene setting on the TV Cinema Sports Music Animation Photo Game Graphics Sound field HD-D.C.S. SPORTS Live Concert A.F.D. Auto A.F.D. Auto A.F.D. Auto A.F.D. Auto Home Theater Control If a "Home Theater Control"-compatible TV is connected to the receiver, an icon for Internet based applications appears on the connected TV. You can switch an input of the receiver or switch sound fields by using your TV's remote control. You can also adjust the level of the center speaker or the subwoofer, or adjust the settings of "Sound Optimizer" (page 72), "Dual Mono" (page 97), or "A/V Sync" (page 98). To use the Home Theater Control function, your TV must be able to access a broadband service. For details, refer to the operating instructions supplied with your TV. Outputting the HDMI signals even when the receiver is in standby mode (Pass Through) You can output the video and audio signals from the HDMI IN jack to the TV connected to the HDMI OUT jack even when the receiver is in standby mode. If you use this function while "Control for HDMI" is set to "On," the input of the receiver is switched in accordance with the operation of the connected equipment, even when the receiver is in standby mode. When you activate this function, make the settings for "Pass Through" following the steps below. 1 Select "Settings" from the home menu, then press . 2 Select "HDMI Settings," then press . 80US