Sony STR-DA3700ES Operating Instructions - Page 89
Using a bi-amplifier connection, To connect speakers, To set up speakers
View all Sony STR-DA3700ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Using Other Features Using a bi-amplifier connection If you are not using surround back speakers and front high speakers, you can use the SURROUND BACK/FRONT HIGH/ZONE 2 terminals for the front speakers for use with a bi-amplifier connection. To connect speakers Front speaker (R) Front speaker (L) • If you make the bi-amplifier settings, the speaker level, balance, and equalizer settings of the surround back speakers become invalid, and those of the front speakers are used. • If the speaker pattern is set so that there are surround back speakers or front high speakers, you cannot set the SURROUND BACK/FRONT HIGH/ZONE 2 terminals for a bi-amplifier connection. • When you operate the receiver without using the GUI, set "SB ASSIGN" to "BI-AMP" in "SPEAKER" (page 112). Hi Hi Lo Lo Connect the jacks on the Lo (or Hi) side of the front speakers to the FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SURROUND BACK/ FRONT HIGH/ZONE 2 terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid receiver malfunction. To set up speakers For details, see "Speaker Connection" in the Speaker Settings menu (page 94). Notes • You cannot use the FRONT B terminals for a biamplifier connection. • Make the bi-amplifier settings before you perform the Auto Calibration function. 89US