Sony STR-DA3700ES Operating Instructions - Page 125

Using the Remote Control 5 Press the button on the remote control to be learned from to transmit the remote control code. While the remote control of the receiver is receiving the signal, the input button selected in step 2 turns off. The RM SET UP button flashes twice, then the learning process is completed. When the learning process fails, the RM SET UP button flashes five times. Try to perform process again from step 2. 6 Press RM SET UP to finish the learning function process. To cancel learning Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. However, after performing step 3, you cannot cancel the settings even if you press RM SET UP. In this case, after leaving the remote control untouched for 10 seconds, press RM SET UP to cancel the settings. The RM SET UP button flashes twice, then the clearing process is completed. When the clearing process fails, the RM SET UP button flashes five times. Try to perform process again from step 2. 5 Press RM SET UP to finish the erasing process. Clearing the memory of the remote control AV ?/1 ?/1 RM SET UP Using a command that has been learned When selecting a learned input, press the button used to learn that function. To erase the learned code 1 Press FAVORITES while pressing RM SET UP. 2 Press the input button for which you want to clear the setting. The input button flashes. (The RM SET UP button remains lit.) 3 Press ?/1 for more than 1 second. The input button flashes twice, repeatedly. 4 Press the button which learned the command to clear the stored setting. MASTER VOL continued 125US