Sony STR-DA3700ES Operating Instructions - Page 96
Test Tone, Speaker Impedance, Distance Unit, To output a test tone from each, speaker
View all Sony STR-DA3700ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Test Tone Lets you select the test tone type on the Test Tone screen. To output a test tone from each speaker You can output a test tone from the speakers in sequence. 1 Select "Test Tone," then press . The Test Tone screen appears. 2 Adjust the parameter, then press . • Off • Auto The test tone is output from each speaker in sequence. • L, C, R, SR, SB*, SBR, SBL, SL, LH, RH, SW * "SB" appears when only one surround back speaker is connected. You can select which speakers will output the test tone. 3 Adjust "Level," then press . To output a test tone from adjacent speakers You can output a test tone from adjacent speakers so that you can adjust the balance between the speakers. 1 Select "Phase Noise," then press . The Phase Noise screen appears. 2 Adjust the parameter, then press . • Off • L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*, SBR/SBL, SR/SL, SB/SL*, SBL/SL, LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R *"SR/SB" and "SB/SL" appear when only one surround back speaker is connected. Lets you output the test tone sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. 3 Adjust "Level," then press . To output the source sound from adjacent speakers You can output the source sound from adjacent speakers so that you can adjust the balance between the speakers. 1 Select "Phase Audio," then press . The Phase Audio screen appears. 2 Adjust the parameter, then press . • Off • L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*, SBR/SBL, SR/SL, SB/SL*, SBL/SL, LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R *"SR/SB" and "SB/SL" appear when only one surround back speaker is connected. Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. 3 Adjust "Level," then press . Speaker Impedance Lets you set the speaker impedance. For details, see "7: Setting up the receiver using the Easy Setup" (page 45). x4Ω x8Ω Distance Unit Lets you select the unit of measurement for setting distances. x meter The distance is displayed in meters. x feet The distance is displayed in feet. 96US