Sony STR-DH710 Operating Instructions - Page 20

a)Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection. - If you connect only one surround back speaker, connect it to the L of this terminals. - If you are not using surround back speaker or front high speakers, and you have an additional front speaker system, connect the additional front speaker system to this terminals. Set "SB ASGN" to "SPK B" in the SPEAKER menu (page 79). You can select the front speaker system you want to use with the SPEAKERS button on the receiver (page 33). - If you are not using surround back speaker or front high speakers, you can connect the front speakers to this terminals using bi-amplifier connection (page 20). b)When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output. Notes • Before connecting the AC power cord (mains lead), make sure that metalic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • After you have install and connect your speaker, be sure to select the speaker pattern from SPEAKER menu (page 77). Bi-amplifier connection If you are not using surround back speakers or front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals using a bi-amplifier connection. Front speaker (Right) Front speaker (Left) Hi Lo EZW-T100 ANTENNA HDMI ASSIGNABLE (INPUT ONLY) IN 3 IN 2 IN 1 AM IN 3 IN 2 IN 1 MONITOR OUT DC5V 0.7A MAX Y DMPORT PB/ CB VIDEO IN PR/ CR COMPONENT VIDEO AUDIO ASSIGNABLE (INPUT ONLY) OUT L AUDIO IN AUDIO IN AUDIO IN R VIDEO IN AUDIO IN IN SAT/ CATV IN DVD IN OPTICAL OPTICAL COAXIAL TV DIGITAL (ASSIGNABLE) VIDEO OUT VIDEO IN VIDEO OUT AUDIO OUT MONITOR AUDIO IN SURROUND BACK/ FRONT HIGH/ BI-AMP/ FRONT B R L AUDIO OUT SA-CD/CD/CD-R TV SAT/CATV BD VIDEO 1 SUBWOOFER CENTER SURROUND R L SPEAKERS TV OUT ARC FRONT A L R SURROUND BACK/ FRONT HIGH/ BI-AMP/ FRONT B R L CENTER SURROUND R L SPEAKERS FRONT A L R Hi Lo Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver. After you have made the bi-amplifier connection, set "SB ASGN" to "BI-AMP" in the SPEAKER menu (page 70). 20GB