Sony STR-DH710 Operating Instructions - Page 64

Enjoying the system's sound in another room (For the S-AIR receiver only (not supplied)) You can enjoy the system's sound in another room by using the S-AIR receiver. The S-AIR receiver can be placed in another room for enjoying the system's sound there. For details of the S-AIR receiver, refer to the operating instructions supplied with the S-AIR receiver. , V/v/B/b O AMP MENU MENU 1 Set the ID of the S-AIR receiver to match the ID of the S-AIR main unit. • To set the ID of the S-AIR main unit, see "To set the ID of the S-AIR main unit" (page 61). • To set the ID of the S-AIR receiver, refer to the operating instructions supplied with the S-AIR receiver. Notes • When you are using another S-AIR sub unit, such as a surround amplifier, do not change the ID of the S-AIR main unit. Set the ID of the S-AIR receiver to match the ID of the S-AIR main unit. • When you pair the S-AIR main unit and another S-AIR sub unit, such as a surround amplifier, you also need to pair the S-AIR main unit and the S-AIR receiver. For details, see "Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation)" (page 62). 2 Press AMP MENU. 64GB 3 Press V/v repeatedly to select "S-AIR", then press or b. 4 Press V/v repeatedly to select "MODE", then press or b. 5 Press V/v repeatedly to select the setting you want. • PARTY: The S-AIR receiver outputs sound according to the input selected on the S-AIR main unit. • SEPARATE: You can select the input you want for the S-AIR receiver while the input of the S-AIR main unit remain unchanged. When at SEPARATE mode, you can only select "SA-CD/ CD", "DMPORT", "FM TUNER", "AM TUNER" and the input that is currently selected at the S-AIR main unit. Note When "FM TUNER" or "AM TUNER" is selected on the S-AIR main unit, you can only select the same band for the tuner on the S-AIR receiver. However, you can select input other than TUNER on the S-AIR receiver. 6 Adjust the volume on the S-AIR receiver. Notes • The sound of the S-AIR receiver may be cut off by operation of the S-AIR main unit. • When the sound is other than 2 channel stereo, multi channel sound is downmixed to 2 channel. • Signals with a sampling frequency of more than 96 kHz cannot output to this S-AIR receiver. To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press N, X, x, ./> S-AIR CH Operation Share the same operations on the remote. Change the function of the system. For details, refer to the operating instructions of the S-AIR receiver.