Sony STR-DH710 Operating Instructions - Page 62

To set the ID of the S-AIR sub unit Be sure to match the ID on S-AIR sub unit you want to the S-AIR main unit. For details on setting the ID of the surround amplifier and S-AIR receiver, refer to the operating instructions supplied with the surround amplifier and S-AIR receiver. Sound transmission is established as follows (example): S-AIR main unit (this receiver) ?/1 ID A Other S-AIR main unit ID B x Before pairing Sound transmission is established by the ID (example). Your room Neighbor S-AIR main unit (this receiver) ?/1 ID A ID A S-AIR sub unit ID A S-AIR sub unit ID A ID A S-AIR sub unit S-AIR sub unit ID B S-AIR sub unit Notes • Sources with copyright protection may not be playable on S-AIR sub unit. • If you have connected surround amplifier, surround sound will not be output from S-AIR main unit. x After pairing Sound transmission is established between the paired S-AIR main unit and S-AIR sub unit(s) only. Your room Neighbor S-AIR main unit (this receiver) ?/1 ID A No transmission Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) To establish sound transmission, you need to set the same ID for your S-AIR main unit and S-AIR sub unit. However, if your neighbors have S-AIR products and their IDs are the same as yours, your neighbors could receive the sound of your S-AIR main unit or vice versa. To prevent this, you can pair the S-AIR main unit with a specific S-AIR sub unit by performing the pairing operation. ID A S-AIR sub unit Pairing ID A S-AIR sub unit 62GB