Sony STR-DH710 Operating Instructions - Page 44

Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. , V/v/B/b O AMP MENU MENU 1 Press AMP MENU. 2 Press V/v repeatedly to select "SYSTEM", then press or b. 3 Press V/v repeatedly to select "SLEEP", then press or b. 4 Press V/v repeatedly to select the preset time you want, then press . The display changes as follows: OFF y 0-30-00 y1-00-00 y 1-30-00 y 2-00-00 When sleep timer is being used, "SLEEP" indicator lights up in the display. Tips • To check the remaining time before the receiver turns off, repeat steps 1 to 3. The remaining time appears on the display. • A count down is displayed 1 minute before the receiver turns off. Recording You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a CD-R You can record onto a CD-R using the receiver. Refer to the operating instructions supplied with your CD recorder. 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback component for playing. For example, tune to the radio station you want to record (page 45). 3 Prepare the recording component. Insert a blank CD-R into the CD recorder and adjust the recording level. 4 Start recording on the recording component, then start playback on the playback component. Note Sound adjustments do not affect the signal output from the SA-CD/CD/CD-R AUDIO OUT jacks. 44GB