Sony STR-DH710 Operating Instructions - Page 82
Hdmi Menu, Ctrl.hdmi, Pass.thru, Audio.out, Sw Level
UPC - 027242779976
View all Sony STR-DH710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
HDMI menu You can make various adjustments for HDMI settings. x CTRL.HDMI Lets you turn the Control for HDMI function on or off. For details, see ""BRAVIA" Sync Features" (page 55). x PASS.THRU Lets you output the HDMI signals to the TV even when the receiver is in standby mode. • ON When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI TV OUT jack. • AUTO When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI TV OUT jack. Sony recommends this setting if you use a TV that is compatible with "BRAVIA" Sync. This setting saves power in the standby mode compared with the "ON" setting. • OFF The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected component's source on the TV. This setting saves power in the standby mode compared with the "ON" setting. Notes • This parameter is not available when "CTRL.HDMI" is set to "CTRL OFF". • When "AUTO" is selected, it may take a little more time for the image and sound to be output to the TV than when "ON" is selected. • When the receiver is in standby mode, "HDMI" indicator will lights up if "PASS.THRU" is set to "AUTO" or "ON". However, when "PASS.THRU" is set to "AUTO", this indicator will lights off if no signals are detected. x AUDIO.OUT Lets you set the HDMI audio output from the playback component connected to the receiver via an HDMI connection. • TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play back multi channel software. • When you connect the receiver to an image display component (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". • AMP The HDMI audio signals from the playback component are only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when "AUDIO.OUT" is set to "AMP". x SW LEVEL Lets you set the level of the subwoofer to 0 dB or +10 dB when multi channel Linear PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. • SW AUTO Automatically sets the level to 0 dB or +10 dB depending on the frequency. • SW +10 dB • SW 0 dB Note This parameter is only available when HDMI input signals are detected. 82GB