Sony STR-DH710 Operating Instructions - Page 43

Basic Operations Naming inputs You can enter a name of up to 8 characters for inputs (except TUNER) and display it on the receiver's display. This is convenient for labeling the jacks with the names of the connected components. 1 Press one of the input buttons to select the input you want to create an index name for. You can also use INPUT SELECTOR on the receiver. 2 Press AMP MENU. 3 Press V/v repeatedly to select "SYSTEM", then press or b. 4 Press V/v repeatedly to select "NAME IN", then press or b. The cursor flashes and you can select a character. 5 Press V/v to select a character, then press B/b to move the cursor to the next position. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. 6 Press . The name you entered is registered. Viewing information on the display You can check the sound field, etc., by changing the information on the display. DISPLAY O Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows: All inputs except the FM and AM band Index name of the inputa) t Selected input t Sound field currently applied t Volume level t Stream info FM and AM band Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in 24-hour system mode)b) t Sound field currently applied t Volume level a)Index name appears only when you have assigned one to the input or preset station (page 43, 48). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. b)During RDS reception only (Models of area code AU1, TW2 only) (page 49). Note Character or marks may not be displayed for some languages. 43GB