Sony STR-DH710 Operating Instructions - Page 26

Notes on connecting cables • Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p or Deep Color (Deep Colour) images may not be displayed properly. • Sony recommends that you use an HDMI authorized cable or Sony HDMI cable. • We do not recommend using an HDMI-DVI conversion cable. When you connect an HDMI-DVI conversion cable to a DVI-D component, the sound and/or the image may not be output. Connect other audio cords or digital connecting cords, then set "A. ASSIGN" in AUDIO menu (page 81) when the sound is not output correctly. Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI TV OUT jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI TV OUT jack. The video input signals cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks. • When you want to listen to the sound from the TV speaker, set "AUDIO.OUT" to "TV+AMP" in the HDMI menu (page 82). If you cannot play back multi channel software, set to "AMP". However, the sound will not output from the TV speaker. • Be sure to turn on the receiver when video and audio signals of a playback component are being output to a TV through this receiver. If you set "PASS.THRU" to "OFF", video and audio signals will not be transmitted when the power is set to off. • DSD signals of Super Audio CD are not input and output. • The multi/stereo area audio signals of a Super Audio CD are not output. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable. • Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback component is switched. • When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output. In this case, check the specification of the connected component. • Set the image resolution of the player to more than 720p/1080i to enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD). • The image resolution of player may need certain settings be made before you can enjoy multi channel Linear PCM. Refer to the operating instructions of the player. • Not every HDMI component supports all functions that are defined by the specified HDMI version. For example, components that support HDMI, version 1.4, may not support Audio Return Channel (ARC). • Refer to the operating instructions of each connected component for details. 26GB