Sony WF-C500 Help Guide - Page 45
Pairing and connecting with a computer Windows 8.1
View all Sony WF-C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Help Guide Wireless Stereo Headset WF-C500 Pairing and connecting with a computer (Windows 8.1) The operation to register the device that you wish to connect to is called "pairing". First, pair a device to use it with the headset for the first time. Before starting the operation, make sure of the following: Your computer has a Bluetooth function that supports music playback connections (A2DP). The computer is placed within 1 m (3 feet) of the headset. The headset is charged sufficiently. The operating instructions of the computer is in hand. Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to the operating instructions supplied with the computer. 1 Remove both units of the headset from the charging case. The headset turns on automatically. Check that the indicators (blue) flash. 2 Enter pairing mode on this headset. When you pair the headset with a device for the first time after purchase or after initializing the headset (if the headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from the charging case. In this case, proceed to step . When you pair a second or subsequent device (the headset has pairing information for other devices), press and hold the buttons on both the left and right units for about 5 seconds. Check that the indicator (blue) on both units of the headset repeatedly flashes twice in a row. You will hear the voice guidance say "Bluetooth pairing" from both headset units at the same time. 45