Sony WF-C500 Help Guide - Page 64

Help Guide Wireless Stereo Headset WF-C500 Connecting to a paired Bluetooth device 1 Remove the headset from the charging case. The headset turns on automatically. Check that the indicators (blue) flash. If the headset has automatically connected to the last connected device, you will hear the voice guidance say "Bluetooth connected" from the unit of the headset that was removed first from the charging case. Check the connection status on the Bluetooth device. If it is not connected, proceed to step . 2 Make the Bluetooth connection from the Bluetooth device. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device. You will hear the voice guidance say "Bluetooth connected" from the unit of the headset that was removed first from the charging case. Hint The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device. Note If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. In that case, deactivate the Bluetooth function on the last-connected device or turn off the power. If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and perform the pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device. Related Topic Wearing the headset Using only one unit of the headset How to make a wireless connection to Bluetooth devices Pairing and connecting with a Bluetooth device Listening to music from a device via Bluetooth connection Disconnecting Bluetooth connection (after use) 5-030-793-11(1) Copyright 2021 Sony Corporation 64