Sony XAVW1 Operating Instructions - Page 14

Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button with a pointed object, such as a ball-point pen. Reset button Note Pressing the reset button will erase the clock setting and some stored contents. Performing initial settings 1 Set the center speaker connection status. Touch "ON" if a center speaker is connected, or "OFF" if not. 2 Set the subwoofer connection status. Touch "ON" if a subwoofer is connected, or "OFF" if not. 3 Set the listening position. Touch "Front L" if your listening position is front left, or "Front R" if front right. 4 Touch "OK." The source list appears when the setting is complete. This setting can then be further configured in setup. For details on setting the speaker connection status, see "Setting the speaker connection status" on page 32. For details on setting the listening position, see "Optimizing sound for the listening position - Intelligent Time Alignment" on page 31. Note If you set to "Center Speaker ON" without connecting the center speaker, vocal sound is not output, and if you set to "Subwoofer ON" without connecting the subwoofer, bass sound is not output. SRC OFF After resetting, the display for the initial speaker settings appears. Preparing the card remote commander Before using the card remote commander for the first time, remove the insulation film. Be sure to set correctly following the procedure below to enjoy the various sound functions of this unit. To skip the initial settings, press (OFF)/(SRC), or insert a disc. Note The initial setting display automatically disappears if no operation is performed for 30 seconds. During setup procedure, it is canceled if no operation is performed for 15 seconds. 14