Sony XBR-49X950H User Manual - Page 94

Reset the remote control, Note, Related topics

Page 94 highlights

connected to the TV using Bluetooth. Radio interference may occur in the following situations and cause issues such as poor operation of microphone or remote control because Bluetooth radio waves use the same frequency as radio waves emitted from microwaves and wireless LANs (IEEE802.11b/g/n). There are people or obstacles (such as metal objects or walls) between the TV and remote control. A microwave is being used nearby There is a wireless LAN access point nearby The TV and remote control are unpaired In these cases, try the following solutions. Use the remote control closer to the TV Remove obstacles between the TV and remote control Use the remote control when a microwave is not in use Turn off other Bluetooth devices Check the TV's Bluetooth setting and turn it on and off Press the HOME button and select the following in order. If [Settings] - [Remotes & Accessories] - [Bluetooth settings] - [Bluetooth] is disabled, enable it. If it is enabled, disable and then enable it again. Set wireless LAN access points and microwaves at least 10 m away from the TV If the 5 GHz band (IEEE802.11a) is available in the wireless LAN, connect to the 5 GHz band Pair the remote control again Press the HOME button and select the following in order. [Settings] - [Remotes & Accessories] - [Remote control] - [Connect via Bluetooth] - [Connect a new remote] - follow the on-screen instructions to reconnect the remote control. If you cannot operate the TV with the supplied remote control, select the above in order until [Connect a new remote] using other Sony TV's remote control, and then try connecting again with the supplied remote control. Depending on your model, a Bluetooth remote control is supplied and already paired with the TV. At the time of shipment, the supplied paired remote control cannot be used to operate other TVs. When checking remote control operation, use with the TV with which the remote control was supplied. Reset the remote control If the remote control does not operate correctly due to poor battery contact or static electricity, the problem may be resolved by resetting the remote control. 1 Remove the batteries from the remote control. 2 Press the power button on the remote control for three seconds. 3 Install new batteries into the remote control. If the problem persists, refer to If a full reset (restart) of the TV is required and Frequently Asked Questions for Troubleshooting pages. Note When you unplug the TV and plug it in again, the TV may not be able to turn on for a while, even if you press the power button on the remote control or the TV. This is because it takes time to initialize the system. Wait for about 10 to 20 seconds, then try again. Related topics Using the remote control Using the remote control microphone

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102

1
2
3
connected to the TV using Bluetooth. Radio interference may occur in the following situations and
cause issues such as poor operation of microphone or remote control because Bluetooth radio
waves use the same frequency as radio waves emitted from microwaves and wireless LANs
(IEEE802.11b/g/n).
There are people or obstacles (such as metal objects or walls) between the TV and remote
control.
A microwave is being used nearby
There is a wireless LAN access point nearby
The TV and remote control are unpaired
In these cases, try the following solutions.
Use the remote control closer to the TV
Remove obstacles between the TV and remote control
Use the remote control when a microwave is not in use
Turn off other Bluetooth devices
Check the TV’s Bluetooth setting and turn it on and off
Press the HOME button and select the following in order.
If [Settings] — [Remotes & Accessories] — [Bluetooth settings] — [Bluetooth] is disabled,
enable it. If it is enabled, disable and then enable it again.
Set wireless LAN access points and microwaves at least 10 m away from the TV
If the 5 GHz band (IEEE802.11a) is available in the wireless LAN, connect to the 5 GHz band
Pair the remote control again
Press the HOME button and select the following in order.
[Settings] — [Remotes & Accessories] — [Remote control] — [Connect via Bluetooth] —
[Connect a new remote] — follow the on-screen instructions to reconnect the remote control.
If you cannot operate the TV with the supplied remote control, select the above in order until
[Connect a new remote] using other Sony TV's remote control, and then try connecting again
with the supplied remote control.
Depending on your model, a Bluetooth remote control is supplied and already paired with the TV.
At the time of shipment, the supplied paired remote control cannot be used to operate other TVs.
When checking remote control operation, use with the TV with which the remote control was
supplied.
Reset the remote control
If the remote control does not operate correctly due to poor battery contact or static electricity, the
problem may be resolved by resetting the remote control.
Remove the batteries from the remote control.
Press the power button on the remote control for three seconds.
Install new batteries into the remote control.
If the problem persists, refer to If a full reset (restart) of the TV is required
and Frequently Asked
Questions for Troubleshooting
pages.
Note
When you unplug the TV and plug it in again, the TV may not be able to turn on for a while, even
if you press the power button on the remote control or the TV. This is because it takes time to
initialize the system. Wait for about 10 to 20 seconds, then try again.
Related topics
Using the remote control
Using the remote control microphone