TASCAM DA-6400 DA-6400dp Owners Manual - Page 11
Rear panel, DA-6400 rear panel
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 - Names and Functions of Parts a SHIFT button oo When the Home Screen is open, press the MULTI JOG dial while pressing and holding this button to show a white frame in the meter section, and turn the MULTI JOG dial to select the audio channel to be output from the PHONES jack. oo When the Home Screen is open, press and hold the MULTI JOG dial while pressing and holding the SHIFT button to switch the headphone monitoring mode between STEREO and MONO. (See "Setting headphones monitoring mode" on page 20.) oo When the meter mode setting is 32ch, press the HOME [METER] button while pressing and holding this button to switch between showing level meters for channels 1-32 and 33-64 on the Home Screen. (See "Setting the meter mode" on page 53.) Rear panel 88 DA-6400 rear panel oo Press the INFO button while pressing and holding this button to open the MARK INFO page. oo Press the MENU button while pressing and holding this button to open the menu pages in the opposite direction. oo When an audio output channel is selected on the Home Screen, when a channel is selected for setting changes on the REC FUNCTION or INPUT MONITOR screen, or when a folder is selected on the BROWSE screen, turn the MULTI JOG dial while pressing and holding this button to move the cursor by large amounts. When stopped, in playback standby or playing back. oo Press this button while pressing and holding the . [MARK .] button to move to the previous mark and resume the previous state. oo Press this button while pressing and holding the / [MARK /] button to move to the next mark and resume the previous state. 88 DA-6400dp rear panel s SLOT 2 Use this slot to install an I/O card (sold separately). d SLOT 1 Use this slot to install an I/O card (sold separately). f TIMECODE IN connector This BNC connector is for the input of SMPTE timecode. g TIMECODE OUT connector This BNC connector is for the output of SMPTE timecode. h WORD/VIDEO THRU/OUT connector This BNC connector is for the output of word clock and video reference signals. This connector outputs word clock signals (thru or 44.1, 48, 88.2 or 96 kHz) and video reference signals (signal thru from IN jack). j WORD/VIDEO IN connector This BNC connector is for the input of word clock and video reference signals. Use this connector to input word clock signals (44.1, 48, 88.2 or 96 kHz) and video reference signals (NTSC/PAL blackburst and HDTV tri-level). k ETHERNET connector This is an Ethernet port. Use this to connect to a network, transfer files and control the unit externally. l RS-422 terminal This is a 9-pin D-sub RS-422 serial control terminal. Connect an external controller here. ; PARALLEL connector This is a 15-pin D-sub parallel control terminal. Connect an external controller here. z Heat dissipation fan This fan is to prevent the unit from overheating. Do not allow anything to block the fan and prevent the dispersion of heat. x AC IN connector (DA-6400 only) Plug the included power cord in here. c AC IN A/B connectors (DA-6400dp only) Plug the included power cords in here. To operate the unit with power supply redundancy, connect power supplies to both the AC IN A and AC IN B connectors. TASCAM DA-6400/DA-6400dp 11
![](/manual_guide/products/tascam-da6400-da6400dp-owners-manual-d4cebcf/11.png)