TASCAM DA-6400 DA-6400dp Owners Manual - Page 51
– Other Settings, Information Screens and Keyboard Operations
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
11 - Other Settings, Information Screens and Keyboard Operations INFO button and indicator appearance The INFO indicator lights blue when the unit is functioning properly. The INFO indicator lights red when an error or warning has occurred with the unit. Press this button when the INFO indicator is lit blue to show the unit's operation status on the display. Press this button when the INFO indicator is lit red to show the error message on the display. 88 Operation status display (when lit blue) Contents 3 Due to the increased number of files in a folder, for example, writing to the media has become slower so the recording buffer is about to overflow. Reduce the number of recording channels or create a new folder. These messages could be shown at the same time. 88 Error display 1 (when lit red) Contents CLOCK Sampling frequency.and clock source currently used for operation FILE Information about currently selected file File type/quantization bit depth Number of channels/file mode Recording date When lit blue, press the INFO button to switch between the Home Screen and operation status display. 88 Alert display (when lit red) Contents 1 Rebuilding is necessary. Press the MULTI JOG dial to rebuild. Contents This shows media errors. For the DA-6400dp, this also shows power supply errors. (See "Setting the power redundancy check function (DA-6400dp only)" on page 55.) 88 Error display 2 (when lit red) Contents This shows master clock and slot errors. Press the INFO button to cycle through the screens in this order: alert, error 1, error 2, operation status, Home Screen. Alert and error screens, however, will only be shown when one has occurred (when lit red). Checking the firmware version 1. Select the VERSION INFO item on the SYSTEM SETUP page to open the VERSION INFORMATION screen. (See "Menu operation procedures" on page 16.) Contents 2 The remaining recording time is less than 10 minutes. This appears when the remaining recording time becomes less than 10 minutes when recording or in recording standby. Once this alert has been viewed, it will not appear again until recording ends. On the VERSION INFORMATION screen, information is shown about the system firmware version and build number, as well as cards installed in SLOT 1 and SLOT 2. 2. Press the EXIT [PEAK CLEAR] button to return to the Menu Screen. TASCAM DA-6400/DA-6400dp 51