TASCAM DA-6400 DA-6400dp Owners Manual - Page 40
Setting the SNTP function, SNTP STATUS, SNTP UPDATE, NTP SERVER, UPDATE TIME
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
7 - Internal Settings Setting the SNTP function Use the SNTP page to make settings for automatically synchronizing with the date and time of an Internet time server. 88 NTP SERVER This shows the setting status of the NTP SERVER screen. Select the NTP SERVER item, and press the MULTI JOG dial to open the NTP SERVER screen. 88 SNTP STATUS This shows the current status of the SNTP function. Message Sync at YYYY/MM/DD hh:mm Starting Up Accessing Server Disabled Waiting for Network Server Name not found Server Name found Server connection failed Server refusing connections Status The unit will be synchronized with the NTP server at the date and time shown. The unit is preparing for operation. The unit is connecting with a server. The SNTP function is disabled. The unit is waiting to confirm the network connection. The server name could not be found on the DNS server. The server name was found on the DNS server. The server has not responded. Server responded, but is refusing additional connections; select a different SNTP server 88 SNTP UPDATE This shows the setting status of the MODE item on the SNTP UPDATE screen. Select the SNTP UPDATE item, and press the MULTI JOG dial to open the SNTP UPDATE screen. Edit the NTP server name, which must have no more than 32 characters (default: ntp.nict.jp). For details about how to edit the text, see "Editing text" on page 26. NOTE Press the MULTI JOG dial on PRESET5 to open a pull up menu. Turn the MULTI JOG dial to select a menu item, and press the MULTI JOG dial to input the preset value of that item. Press the EXIT [PEAK CLEAR] button to close the pull-up menu. 88 UPDATE TIME This shows the setting status of the Time item on the UPDATE TIME screen. Select the UPDATE TIME item, and press the MULTI JOG dial to open the UPDATE TIME screen. MODE item Set the SNTP function update mode. Options Disable (default): Do not use SNTP function. Start Up: When the unit starts up, get the time from an NTP server and use it to set the built-in clock. Start Up/24h cycle: Get the time from an NTP server and use it to set the built-in clock when the unit starts up, as well as when the time set with the UPDATE TIME item occurs every 24 hours. NOTE When using the SNTP function, you must set the NTP Server item and the NETWORK page DNS SETUP item. Time item If the MODE item on the SNTP UPDATE screen is set to Start Up/24h cycle, set the time when the time will be acquired from the NTP server. Options: 00:00-00:09 - 23:00-23:09 (in 1-hour steps, default: "00:00-00:09") NOTE Since access to SNTP servers on the hour could result in congestion, the unit will access the SNTP server randomly during the first 10 minutes of the hour. 40 TASCAM DA-6400/DA-6400dp
![](/manual_guide/products/tascam-da6400-da6400dp-owners-manual-d4cebcf/40.png)