Home » TASCAM Manuals » Audio Mixers » TASCAM DA-6400 » Manual Viewer

TASCAM DA-6400 DA-6400dp Owners Manual - Page 58

– Specifications, General, Analog output, Control input/output, Other

Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

13 - Specifications General 88 Recording media SSD/HDD 88 File system FAT32 88 File formats BWF format (wav extension) 88 Number of channels 64 channels maximum (44.1/48kHz sampling frequency) 32 channels maximum (88.2/96kHz sampling frequency) 88 Quantization bit depth 16/24-bit 88 Sampling frequencies 44.1, 48, 88.2 or 96 kHz 88 Clock references INTERNAL, WORD IN, VIDEO IN, SLOT1 IN, SLOT2 IN 88 Timecode frames 23.976F, 24F, 25F, 29.97DF, 29.97NDF, 30DF, 30NDF Analog output 88 PHONES jack Connector: 6.3mm (1/4") standard stereo jack Maximum output level: 45 mW + 45 mW or higher (THD+N 0.1% or less, when into 32 Ω load) Control input/output 88 USB port Connector: USB 2.0 A type Protocol: USB 2.0 Hi Speed (480 Mbps) 88 TIME CODE IN connector Connector: BNC Signal voltage amplitude: 0.5-5 Vp-p Input impedance: 10 kΩ Format: SMPTE 12M-1999 compliant 88 TIME CODE OUT connector Connector: BNC Signal voltage amplitude: 2 Vp-p Output impedance: 600 Ω Format: SMPTE 12M-1999 compliant 88 WORD/VIDEO IN connector Connector: BNC Signal voltage amplitude: 0.5-5 Vp-p (WORD IN)/1 Vp-p (VIDEO IN) Input impedance: 75 Ω ±10% (termination resistance on) (See "Making word/video connector settings" on page 23 for details about turning termination resistance on/off ) Input frequency (WORD): 44.1, 48, 88.2, 96 kHz Input signal (VIDEO): 24/25/29.97/30-frame (NTSC/PAL black burst, HDTV tri-Level) 88 WORD/VIDEO THRU/OUT connector Connector: BNC Signal voltage amplitude: 5V TTL equivalent Output frequency (WORD): 44.1, 48, 88.2, 96 kHz Only THRU OUT for VIDEO signal (See "Making word/video connector settings" on page 23 for details about OUT/THRU switching) 88 ETHERNET connector Connector: RJ45 Compatible standards: 100BASE-TX, 1000BASE-T 88 RS-422 terminal Connector: 9-pin D-sub (female, inch-standard) 88 PARALLEL connector Connector: 15-pin D-sub (female, inch-standard) Other 88 Power AC 100-240V, 50/60Hz 88 Power consumption 21 W (when IF-MA64/EX installed) 88 External dimensions 482.6 × 44.7 × 304.8 mm (width × height × depth) 88 Weight DA-6400: 3.9 kg DA-6400dp: 4.0 kg (Without I/O card (sold separately) or SSD/HDD case installed) 88 Operating temperature range 0°C - 40°C (32°F - 104°F) 58 TASCAM DA-6400/DA-6400dp

Section	Page
1 – Introduction	7
Features	7
Included items	7
Conventions used in this manual	7
Trademarks	7
Precautions for placement and use	8
Notes about power supplies	8
Beware of condensation	8
Cleaning the unit	8
Notes about SSD and HDD drives	8
Notes about media	8
Precautions for use	8
Note about formatting	8
Using the TEAC Global Site	8
User registration	8
2 – Names and Functions of Parts	9
Front panel	9
Rear panel	11
Note about the PARALLEL connector	12
Home Screen	12
Menu structure	14
Basic Menu Screen operations	16
Menu operation procedures	16
3 – Preparation	17
Installing an SSD/HDD drive in the case	17
Loading and removing SSD/HDD cases	17
Loading an SSD/HDD case	17
Removing an SSD/HDD case	17
Using the security screw	17
Connecting and disconnecting USB flash drives	18
Installing I/O cards (sold separately)	18
Turning the unit on and off (putting it in standby)	18
Setting the built-in clock date and time	19
Adjusting the brightness	19
Preparing SSD/HDD drives and USB flash drives for use	19
Connecting headphones	20
Setting headphones monitoring mode	20
Setting the lock function	21
4 – Recording	22
Restrictions on recording operations	22
Setting the master clock	22
Making word/video connector settings	23
Setting the reference level	23
Setting input monitoring	23
Setting input monitoring for specific channels	24
Making recording channel settings	24
Setting the record function for specific channels	24
Setting the recording file format	25
Setting the file name format	26
Editing text	26
Automatically incrementing take numbers	27
Incrementing take numbers manually	27
Adding marks automatically when recording	27
Adding marks manually when recording	28
Adding marks when recording	28
Setting the pause mode function	28
Setting input signal routing	28
Making I/O card settings	28
Settings for IF-MA64/EX and IF-MA64/BN cards	29
Timecode synchronized recording	29
Recording duration	29
5 – Working with Folders (BROWSE screen)	30
Opening the BROWSE screen	30
Navigating the BROWSE screen	30
Icons on the BROWSE screen	30
Folder operations	30
Take and file operations	31
Editing folder, take and file names	31
Deleting folders, takes and files	32
Copying folders, takes and files	32
Rebuilding folders	33
Editing the start timecode of a take	33
Creating new folders	33
Folder structure overview	34
Folder structure	34
File name	34
File formats	34
6 – Playback	35
Files that can be played back	35
Basic playback operations	35
Playing recordings	35
Selecting takes	35
Skipping to the previous/next take	35
Selecting takes directly	35
Searching backward and forward	35
Setting the play mode	35
Setting the repeat mode	35
7 – Internal Settings	36
Setting the timecode	36
TC SETUP 1 page settings	36
TC SETUP 2 page settings	37
PARALLEL connector settings	38
PARALLEL INPUT page settings	38
PARALLEL OUTPUT page settings	38
Network function settings	39
Setting the SNTP function	40
Network functions (FTP server/telnet/VNC)	42
FTP (file transfer protocol) server	42
Remote control (Telnet)	43
VNC (virtual network computing)	44
Making oscillator settings	44
8 – Mark and Locate Functions	45
Mark functions	45
Adding marks	45
Using marks	45
Moving to marks	45
Editing mark names	46
Deleting marks	46
Deleting all marks in the current take	46
Editing mark locations	46
Viewing mark information	46
Locating to a specific time	47
Locating before completely specifying the time	47
9 – Loading Files Recorded by Other Devices	48
Preparation before loading	48
Using the loaded files on the unit	48
10 – Data Transfer Using a Computer	49
Computer system requirements	49
Connecting an SSD/HDD to a computer	49
Disconnecting from a computer	50
11 – Other Settings, Information Screens and Keyboard Operations	51
INFO button and indicator appearance	51
Checking the firmware version	51
Firmware update procedures	52
Viewing media information	52
Setting peak hold time	53
Setting the meter mode	53
Using a USB keyboard to operate the unit	53
Setting the keyboard type	53
Using the keyboard to input names and values	53
List of keyboard operations	54
Setting the power redundancy check function (DA-6400dp only)	55
Exporting/importing system backup data	55
Restoring factory default settings	56
12 – Troubleshooting	57
13 – Specifications	58
General	58
Analog output	58
Control input/output	58
Other	58
Dimensional drawings	59
Block diagrams	59
14 – Important notice regarding software	60

Match case Limit results 1 per page

TASCAM DA-6400/DA-6400dp

13 – Specifications

General

Recording media

SSD/HDD

File system

FAT32

File formats

BWF format (wav extension)

Number of channels

64 channels maximum (44.1/48kHz sampling frequency)

32 channels maximum (88.2/96kHz sampling frequency)

Quantization bit depth

16/24-bit

Sampling frequencies

44.1, 48, 88.2 or 96 kHz

Clock references

INTERNAL, WORD IN, VIDEO IN, SLOT1 IN, SLOT2 IN

Timecode frames

23.976F, 24F, 25F, 29.97DF, 29.97NDF, 30DF, 30NDF

Analog output

PHONES jack

Connector

: 6.3mm (1/4") standard stereo

jack

Maximum output level: 45 mW + 45 mW or higher (THD+N

0.1% or less, when into 32 Ω load)

Control input/output

USB port

Connector: USB 2.0 A type

Protocol: USB 2.0 Hi Speed (480 Mbps)

TIME CODE IN connector

Connector: BNC

Signal voltage amplitude: 0.5–5 Vp-p

Input impedance: 10 kΩ

Format: SMPTE 12M-1999 compliant

TIME CODE OUT connector

Connector: BNC

Signal voltage amplitude: 2 Vp-p

Output impedance: 600 Ω

Format: SMPTE 12M-1999 compliant

WORD/VIDEO IN connector

Connector: BNC

Signal voltage amplitude: 0.5–5 Vp-p (WORD IN)/1 Vp-p

(VIDEO IN)

Input impedance: 75 Ω ±10% (termination resistance on)

(See “Making word/video connector settings” on page 23

for details about turning termination resistance on/off)

Input frequency (WORD): 44.1, 48, 88.2, 96 kHz

Input signal (VIDEO): 24/25/29.97/30-frame (NTSC/PAL black

burst, HDTV tri-Level)

WORD/VIDEO THRU/OUT connector

Connector: BNC

Signal voltage amplitude: 5V TTL equivalent

Output frequency (WORD): 44.1, 48, 88.2, 96 kHz

Only THRU OUT for VIDEO signal

(See “Making word/video connector settings” on page

23 for details about OUT/THRU switching)

ETHERNET connector

Connector: RJ45

Compatible standards: 100BASE-TX, 1000BASE-T

RS-422 terminal

Connector: 9-pin D-sub (female, inch-standard)

PARALLEL connector

Connector: 15-pin D-sub (female, inch-standard)

Other

Power

AC 100-240V, 50/60Hz

Power consumption

21 W (when IF-MA64/EX installed)

External dimensions

482.6 × 44.7 × 304.8 mm (width × height × depth)

Weight

DA-6400: 3.9 kg

DA-6400dp: 4.0 kg

(Without I/O card (sold separately) or SSD/HDD case

installed)

Operating temperature range

0°C – 40°C (32°F – 104°F)