Home » TASCAM Manuals » Audio Mixers » TASCAM DA-6400 » Manual Viewer

TASCAM DA-6400 DA-6400dp Owners Manual - Page 36

– Internal Settings, Setting the timecode, TC SETUP 1 settings

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

7 - Internal Settings Setting the timecode Use the TC SETUP 1 and TC SETUP 2 pages to make settings related to timecode. TC SETUP 1 page settings 88 GENERATOR U.B. This shows the user bits (U.B.) for the timecode generator. Select the GENERATOR U.B. item, and press the MULTI JOG dial to open the GENERATOR USER BITS screen. 88 GENERATOR TC This shows the current timecode generator time. Select the GENERATOR TC item, and press the MULTI JOG dial to open the GENERATOR TC screen. GENERATOR TC screen when set to FREE RUN GENERATOR TC screen when not set to FREE RUN GENERATOR TC item When the GENERATOR MODE item on the TC GENERATOR MODE screen is set to FREE RUN, select RESTART and press the MULTI JOG dial to reset the timecode generator timecode to the start time. TC INPUT item When the GENERATOR MODE item on the TC GENERATOR MODE screen is set to FREE RUN, select CAPTURE and press the MULTI JOG dial to capture the current timecode time shown for TC INPUT and set it as the timecode generator timecode. When the GENERATOR MODE item on the TC GENERATOR MODE screen is set to FREE ONCE or JAM SYNC, the "waiting" (capture status) indicator lights green when waiting to capture timecode. When timecode is captured, the indicator turns off. START TIME item This shows the time when timecode resumes, which is set with the START TIME item on the START TIME screen. GENERATOR U.B. item Set the user bits (U.B.). NOTE You can also use a USB keyboard to input numbers and the letters A-F. 88 TC INPUT MONITOR This shows the input timecode time. 88 TC INPUT FRAME This shows the input timecode frame type. 88 TC INPUT U.B. This shows the user bits (U.B.) for the input timecode. 88 START TIME When the RESTART item on the GENERATOR TC screen is selected and the MULTI JOG dial is pressed, the time that the timecode restarts is shown in the GENERATOR TC item on the TC SETUP 1 page. Select the START TIME item, and press the MULTI JOG dial to open the START TIME screen. START TIME item Set the time when timecode resumes. NOTE You can also use a USB keyboard to input numbers. 36 TASCAM DA-6400/DA-6400dp

Section	Page
1 – Introduction	7
Features	7
Included items	7
Conventions used in this manual	7
Trademarks	7
Precautions for placement and use	8
Notes about power supplies	8
Beware of condensation	8
Cleaning the unit	8
Notes about SSD and HDD drives	8
Notes about media	8
Precautions for use	8
Note about formatting	8
Using the TEAC Global Site	8
User registration	8
2 – Names and Functions of Parts	9
Front panel	9
Rear panel	11
Note about the PARALLEL connector	12
Home Screen	12
Menu structure	14
Basic Menu Screen operations	16
Menu operation procedures	16
3 – Preparation	17
Installing an SSD/HDD drive in the case	17
Loading and removing SSD/HDD cases	17
Loading an SSD/HDD case	17
Removing an SSD/HDD case	17
Using the security screw	17
Connecting and disconnecting USB flash drives	18
Installing I/O cards (sold separately)	18
Turning the unit on and off (putting it in standby)	18
Setting the built-in clock date and time	19
Adjusting the brightness	19
Preparing SSD/HDD drives and USB flash drives for use	19
Connecting headphones	20
Setting headphones monitoring mode	20
Setting the lock function	21
4 – Recording	22
Restrictions on recording operations	22
Setting the master clock	22
Making word/video connector settings	23
Setting the reference level	23
Setting input monitoring	23
Setting input monitoring for specific channels	24
Making recording channel settings	24
Setting the record function for specific channels	24
Setting the recording file format	25
Setting the file name format	26
Editing text	26
Automatically incrementing take numbers	27
Incrementing take numbers manually	27
Adding marks automatically when recording	27
Adding marks manually when recording	28
Adding marks when recording	28
Setting the pause mode function	28
Setting input signal routing	28
Making I/O card settings	28
Settings for IF-MA64/EX and IF-MA64/BN cards	29
Timecode synchronized recording	29
Recording duration	29
5 – Working with Folders (BROWSE screen)	30
Opening the BROWSE screen	30
Navigating the BROWSE screen	30
Icons on the BROWSE screen	30
Folder operations	30
Take and file operations	31
Editing folder, take and file names	31
Deleting folders, takes and files	32
Copying folders, takes and files	32
Rebuilding folders	33
Editing the start timecode of a take	33
Creating new folders	33
Folder structure overview	34
Folder structure	34
File name	34
File formats	34
6 – Playback	35
Files that can be played back	35
Basic playback operations	35
Playing recordings	35
Selecting takes	35
Skipping to the previous/next take	35
Selecting takes directly	35
Searching backward and forward	35
Setting the play mode	35
Setting the repeat mode	35
7 – Internal Settings	36
Setting the timecode	36
TC SETUP 1 page settings	36
TC SETUP 2 page settings	37
PARALLEL connector settings	38
PARALLEL INPUT page settings	38
PARALLEL OUTPUT page settings	38
Network function settings	39
Setting the SNTP function	40
Network functions (FTP server/telnet/VNC)	42
FTP (file transfer protocol) server	42
Remote control (Telnet)	43
VNC (virtual network computing)	44
Making oscillator settings	44
8 – Mark and Locate Functions	45
Mark functions	45
Adding marks	45
Using marks	45
Moving to marks	45
Editing mark names	46
Deleting marks	46
Deleting all marks in the current take	46
Editing mark locations	46
Viewing mark information	46
Locating to a specific time	47
Locating before completely specifying the time	47
9 – Loading Files Recorded by Other Devices	48
Preparation before loading	48
Using the loaded files on the unit	48
10 – Data Transfer Using a Computer	49
Computer system requirements	49
Connecting an SSD/HDD to a computer	49
Disconnecting from a computer	50
11 – Other Settings, Information Screens and Keyboard Operations	51
INFO button and indicator appearance	51
Checking the firmware version	51
Firmware update procedures	52
Viewing media information	52
Setting peak hold time	53
Setting the meter mode	53
Using a USB keyboard to operate the unit	53
Setting the keyboard type	53
Using the keyboard to input names and values	53
List of keyboard operations	54
Setting the power redundancy check function (DA-6400dp only)	55
Exporting/importing system backup data	55
Restoring factory default settings	56
12 – Troubleshooting	57
13 – Specifications	58
General	58
Analog output	58
Control input/output	58
Other	58
Dimensional drawings	59
Block diagrams	59
14 – Important notice regarding software	60

Match case Limit results 1 per page

TASCAM DA-6400/DA-6400dp

7 – Internal Settings

Setting the timecode

Use the

TC SETUP 1

and

TC SETUP 2

pages to make

settings related to timecode.

TC SETUP 1 page settings

GENERATOR TC

This shows the current timecode generator time.

Select the

GENERATOR TC

item, and press the

MULTI JOG

dial to open the

GENERATOR TC

screen.

GENERATOR TC

screen when set to

FREE RUN

GENERATOR TC

screen when not set to

FREE RUN

GENERATOR TC

item

When the

GENERATOR MODE

item on the

GENERATOR MODE

screen is set to

FREE RUN

select RESTART and press the

MULTI JOG

dial to reset

the timecode generator timecode to the start time.

TC INPUT

item

When the

GENERATOR MODE

item on the

GENERATOR MODE

screen is set to

FREE RUN

select CAPTURE and press the

MULTI JOG

dial to capture

the current timecode time shown for

TC INPUT

and

set it as the timecode generator timecode.

When the

GENERATOR MODE

item on the

GENERATOR MODE

screen is set to

FREE ONCE

JAM SYNC

, the “waiting” (capture status) indicator

lights green when waiting to capture timecode. When

timecode is captured, the indicator turns off.

START TIME

item

This shows the time when timecode resumes, which

is set with the

START TIME

item on the

START

TIME

screen.

GENERATOR U.B.

This shows the user bits (U.B.) for the timecode generator.

Select the

GENERATOR U.B.

item, and press the

MULTI

JOG

dial to open the

GENERATOR USER BITS

screen.

GENERATOR U.B.

item

Set the user bits (U.B.).

NOTE

You can also use a USB keyboard to input numbers and the

letters A–F.

TC INPUT MONITOR

This shows the input timecode time.

TC INPUT FRAME

This shows the input timecode frame type.

TC INPUT U.B.

This shows the user bits (U.B.) for the input timecode.

START TIME

When the RESTART item on the

GENERATOR TC

screen is

selected and the

MULTI JOG

dial is pressed, the time that the

timecode restarts is shown in the

GENERATOR TC

item on

the

TC SETUP 1

page.

Select the

START TIME

item, and press the

MULTI JOG

dial

to open the

START TIME

screen.

START TIME

item

Set the time when timecode resumes.

NOTE

You can also use a USB keyboard to input numbers.