TASCAM DA-6400 DA-6400dp Owners Manual - Page 20
Connecting headphones, Setting headphones monitoring mode
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 - Preparation 3. Press the MULTI JOG dial. A second confirmation pop-up message will appear. Connecting headphones Connect headphones to the PHONES jack on the front of the unit. When QUICK FORMAT selected 4. Press and hold the MULTI JOG dial to start formatting. The following pop-up message will appear during formatting. When QUICK FORMAT selected 5. When formatting ends, the pop-up disappears and the Home Screen opens. CAUTION Before connecting headphones, minimize the volume with the PHONES knob. Failure to do so might cause sudden loud noises, which could harm your hearing or result in other trouble. Setting headphones monitoring mode The headphones monitoring mode can be set. 1. Select the PHONES MONITOR MODE item on the PREFERENCES page to open the PHONES MONITOR MODE screen. (See "Menu operation procedures" on page 16.) 2. Set the headphones monitoring mode. Options: STEREO (default), MONO 3. Confirm the setting and return to the Menu Screen. NOTE • When making a setting, you can press the EXIT [PEAK CLEAR] button to cancel the changes and return to the Menu Screen. • When the headphones monitoring mode is set to MONO, the solo selection frame on the Home Screen will be for a mono channel. • When the Home Screen or PHONES MONITOR MODE screen is open, press and hold the MULTI JOG dial while pressing and holding the SHIFT button to switch the headphone monitoring mode between STEREO and MONO. 20 TASCAM DA-6400/DA-6400dp
![](/manual_guide/products/tascam-da6400-da6400dp-owners-manual-d4cebcf/20.png)