TASCAM DA-6400 DA-6400dp Owners Manual - Page 42
Network functions (FTP server/telnet/VNC), FTP (file transfer protocol) server
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 - Internal Settings Network functions (FTP server/telnet/ VNC) FTP (file transfer protocol) server By using an FTP client function, you can transfer files between this unit and a computer. Connect to this unit and log in as you would with another FTP server. When you connect and log in, "ssd" and "usb0" will appear in the root directory. These directories are SSD/HDD and USB. If the corresponding media is not loaded, nothing will appear beneath "ssd" and "usb0". NOTE • Data in files and folders with names that use Japanese or other multibyte characters cannot be displayed or transferred properly. When using the FTP function, use only half-width alphabetical letters, numbers and symbols (ASCII characters) in file and folder names. • For information about FTP client applications that have already been confirmed to work with this unit, please contact TASCAM customer support (contact information at the end of this manual). 88 Required settings for FTP connection The following settings are necessary to connect to this unit by FTP. IP address: The IP address of the unit is shown in the IP ADDRESS item on the NETWORK page. Port number: 21 User name: DA-6400 Case-sensitive (cannot be changed) Password: DA-6400 (default) (Case-sensitive) This can be changed on the PASSWORD screen. (See "Network function settings" on page 39.) NOTE • FTP connection is not possible when the EXTERNAL CONTROL item is set to LOCK on the LOCK SETUP screen. • If the setting is changed to LOCK when there is an FTP connection, the connection will be interrupted. • If a NETWORK page setting is changed when there is an FTP connection, the connection will be interrupted. 88 Overview of file operations using an FTP client application 1. Reading files from the unit Reading files from the unit is always possible. 2. Adding new files to the unit Adding new files to the unit is always possible. If BWF or WAV files are added to the current folder during recording, files will be shown in the list in order from existing files to recorded files and then added files. 3. Overwriting existing files on the unit The current take can only be overwritten when the unit is stopped. Overwriting all other existing files on the unit is always possible. However, if the MODE item on the PLAY MODE screen is set to ALL and the unit is playing, overwriting the take after the current take might not be possible depending on the timing. (See "Setting the play mode" on page 35.) CAUTION • Problems might occur if the size, number of channels, bit depth or sampling frequency of the overwritten file differs from the original file. The following error message will appear if playback is attempted when the problem has occurred. Delete that take from the SSD/HDD to resolve the problem and stop the error message from appearing. • Do not overwrite existing audio files with files that use different sampling frequencies. Doing so could make it impossible to resolve the problem 4. Deleting files on the unit The current take can only be deleted when the unit is stopped. Files other than the current take can be deleted at any time. You must rebuild after deleting a file, however, because discrepancies between management and audio files will occur. oo After deleting a file (and after playback/recording stops), when the following rebuild confirmation message appears, execute rebuilding. oo If you do not rebuild, discrepancies between the management and audio files will occur, and the following message might appear. 42 TASCAM DA-6400/DA-6400dp
![](/manual_guide/products/tascam-da6400-da6400dp-owners-manual-d4cebcf/42.png)