Home » TASCAM Manuals » Audio Mixers » TASCAM DA-6400 » Manual Viewer

TASCAM DA-6400 DA-6400dp Owners Manual - Page 37

Tc Setup 2 Settings, Tc Generator Mode, Tc Frame Type, Tc Output Mode

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

TC SETUP 2 page settings 7 - Internal Settings 88 TC FRAME TYPE This shows the timecode frame type. Select the TC FRAME TYPE item, and press the MULTI JOG dial to open the TC FRAME TYPE screen. 88 TC GENERATOR MODE This shows the timecode generator mode. Select the TC GENERATOR MODE item, and press the MULTI JOG dial to open the TC GENERATOR MODE screen. GENERATOR MODE item This sets the internal timecode generator mode. Option Meaning FREE RUN The timecode generator runs by itself (default) from the START TIME. After capturing the input timecode FREE ONCE once, the generator runs by itself from the captured timecode in free run mode. After capturing the time from the built-in clock when one of the following operations is conducted, the generator TIME OF runs by itself in free run mode. DAY i Turning the unit on i Changing the mode to TC GEN MODE JAM SYNC REGEN REC RUN i Resetting the built-in clock The generator synchronizes to timecode when it is being input. If timecode input stops, the generator runs by itself in free run mode. The generator synchronizes to the input timecode. The timecode generator runs only during recording. The timecode generator stops when not recording. Recording starts when the unit synchronizes with external TC, and recording pauses when synchronization with the external TC is lost. TC SYNC REC When set to TC SYNC REC mode, the TC indicator on the Home Screen lights/blinks red. For details, see the TC indicator explanation in 8 Timecode status on "Home Screen" on page 12. NOTE Set this unit and the TC to use the same frame types. FRAME TYPE item This sets the timecode frame type. Options: 23.976F, 24F, 25F ,29.97DF (default), 30DF, 30NDF 88 TC OUTPUT MODE This shows the timecode output mode. Select the TC OUTPUT MODE item, and press the MULTI JOG dial to open the TC OUTPUT MODE screen. OUTPUT MODE item This sets the timecode output mode. Option Meaning Generator Out Output the timecode of the built-in timecode generator. Play Out (default) This outputs the timecode contained in the file. TASCAM DA-6400/DA-6400dp 37

Section	Page
1 – Introduction	7
Features	7
Included items	7
Conventions used in this manual	7
Trademarks	7
Precautions for placement and use	8
Notes about power supplies	8
Beware of condensation	8
Cleaning the unit	8
Notes about SSD and HDD drives	8
Notes about media	8
Precautions for use	8
Note about formatting	8
Using the TEAC Global Site	8
User registration	8
2 – Names and Functions of Parts	9
Front panel	9
Rear panel	11
Note about the PARALLEL connector	12
Home Screen	12
Menu structure	14
Basic Menu Screen operations	16
Menu operation procedures	16
3 – Preparation	17
Installing an SSD/HDD drive in the case	17
Loading and removing SSD/HDD cases	17
Loading an SSD/HDD case	17
Removing an SSD/HDD case	17
Using the security screw	17
Connecting and disconnecting USB flash drives	18
Installing I/O cards (sold separately)	18
Turning the unit on and off (putting it in standby)	18
Setting the built-in clock date and time	19
Adjusting the brightness	19
Preparing SSD/HDD drives and USB flash drives for use	19
Connecting headphones	20
Setting headphones monitoring mode	20
Setting the lock function	21
4 – Recording	22
Restrictions on recording operations	22
Setting the master clock	22
Making word/video connector settings	23
Setting the reference level	23
Setting input monitoring	23
Setting input monitoring for specific channels	24
Making recording channel settings	24
Setting the record function for specific channels	24
Setting the recording file format	25
Setting the file name format	26
Editing text	26
Automatically incrementing take numbers	27
Incrementing take numbers manually	27
Adding marks automatically when recording	27
Adding marks manually when recording	28
Adding marks when recording	28
Setting the pause mode function	28
Setting input signal routing	28
Making I/O card settings	28
Settings for IF-MA64/EX and IF-MA64/BN cards	29
Timecode synchronized recording	29
Recording duration	29
5 – Working with Folders (BROWSE screen)	30
Opening the BROWSE screen	30
Navigating the BROWSE screen	30
Icons on the BROWSE screen	30
Folder operations	30
Take and file operations	31
Editing folder, take and file names	31
Deleting folders, takes and files	32
Copying folders, takes and files	32
Rebuilding folders	33
Editing the start timecode of a take	33
Creating new folders	33
Folder structure overview	34
Folder structure	34
File name	34
File formats	34
6 – Playback	35
Files that can be played back	35
Basic playback operations	35
Playing recordings	35
Selecting takes	35
Skipping to the previous/next take	35
Selecting takes directly	35
Searching backward and forward	35
Setting the play mode	35
Setting the repeat mode	35
7 – Internal Settings	36
Setting the timecode	36
TC SETUP 1 page settings	36
TC SETUP 2 page settings	37
PARALLEL connector settings	38
PARALLEL INPUT page settings	38
PARALLEL OUTPUT page settings	38
Network function settings	39
Setting the SNTP function	40
Network functions (FTP server/telnet/VNC)	42
FTP (file transfer protocol) server	42
Remote control (Telnet)	43
VNC (virtual network computing)	44
Making oscillator settings	44
8 – Mark and Locate Functions	45
Mark functions	45
Adding marks	45
Using marks	45
Moving to marks	45
Editing mark names	46
Deleting marks	46
Deleting all marks in the current take	46
Editing mark locations	46
Viewing mark information	46
Locating to a specific time	47
Locating before completely specifying the time	47
9 – Loading Files Recorded by Other Devices	48
Preparation before loading	48
Using the loaded files on the unit	48
10 – Data Transfer Using a Computer	49
Computer system requirements	49
Connecting an SSD/HDD to a computer	49
Disconnecting from a computer	50
11 – Other Settings, Information Screens and Keyboard Operations	51
INFO button and indicator appearance	51
Checking the firmware version	51
Firmware update procedures	52
Viewing media information	52
Setting peak hold time	53
Setting the meter mode	53
Using a USB keyboard to operate the unit	53
Setting the keyboard type	53
Using the keyboard to input names and values	53
List of keyboard operations	54
Setting the power redundancy check function (DA-6400dp only)	55
Exporting/importing system backup data	55
Restoring factory default settings	56
12 – Troubleshooting	57
13 – Specifications	58
General	58
Analog output	58
Control input/output	58
Other	58
Dimensional drawings	59
Block diagrams	59
14 – Important notice regarding software	60

Match case Limit results 1 per page

TASCAM DA-6400/DA-6400dp

7 – Internal Settings

TC SETUP 2 page settings

TC GENERATOR MODE

This shows the timecode generator mode.

Select the

TC GENERATOR MODE

item, and press the

MULTI JOG

dial to open the

TC GENERATOR MODE

screen.

GENERATOR MODE

item

This sets the internal timecode generator mode.

Option

Meaning

FREE RUN

(default)

The timecode generator runs by itself

from the START TIME.

FREE ONCE

After capturing the input timecode

once, the generator runs by itself from

the captured timecode in free run mode.

TIME OF

DAY

After capturing the time from the

built-in clock when one of the following

operations is conducted, the generator

runs by itself in free run mode.

Turning the unit on

Changing the mode to TC GEN MODE

Resetting the built-in clock

JAM SYNC

The generator synchronizes to timecode

when it is being input. If timecode input

stops, the generator runs by itself in free

run mode.

REGEN

The generator synchronizes to the input

timecode.

REC RUN

The timecode generator runs only

during recording. The timecode

generator stops when not recording.

TC SYNC

REC

Recording starts when the unit synchro-

nizes with external TC, and recording

pauses when synchronization with the

external TC is lost.

When set to

TC SYNC REC

mode,

the TC indicator on the Home Screen

lights/blinks red. For details, see the TC

indicator explanation in

Timecode

status on “Home Screen” on page 12.

NOTE

Set this unit and the TC to use the

same frame types.

TC FRAME TYPE

This shows the timecode frame type.

Select the

TC FRAME TYPE

item, and press the

MULTI JOG

dial to open the

TC FRAME TYPE

screen.

FRAME TYPE

item

This sets the timecode frame type.

Options:

23.976F

24F

25F

29.97DF

(default),

30DF

30NDF

TC OUTPUT MODE

This shows the timecode output mode.

Select the

TC OUTPUT MODE

item, and press the

MULTI

JOG

dial to open the

TC OUTPUT MODE

screen.

OUTPUT MODE

item

This sets the timecode output mode.

Option

Meaning

Generator Out

Output the timecode of the

built-in timecode generator.

Play Out

(default)

This outputs the timecode

contained in the file.