TP-Link Archer VR900v Archer VR900vDE V2 User Guide - Page 125
Remote Management, Advanced, System Tools, Administration, Remote, Management, via HTTPS
View all TP-Link Archer VR900v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 15 Administrate Your Network Note: If you want that all local devices can manage the modem router, just leave the IP/MAC Address field blank. 15. 7. Remote Management By default, the remote devices are not allowed to manage the modem router from the internet. You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a more secure way to access the router. Note: If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management feature because private addresses are not routed on the internet. Follow the steps below to allow remote devices to manage the modem router over HTTPS. 1. Visit http://tplinkmodem.net, and log in with the account you set for the router. 2. Go to Advanced > System Tools > Administration page. Locate the Remote Management section. 3. Tick the check box to enable Remote Management. Enable Remote Management via HTTPS to allow for HTTPS connection. Keep the Port as the default setting. 4. Set the client device allowed for remote management. Select All to allow all remote devices to manage the modem router. If you just want to allow a specific device to manage the modem router, select Only the Following IP/MAC Address and enter the IP/MAC address of the remote device. 5. Click Save. All devices or the specific device on the internet can log in to your router using the address displayed on the Manage This Router via the Address field to manage the modem router. 120