TP-Link EAP110 EAP Controller Software V1 User Guide - Page 41
System
View all TP-Link EAP110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
EAP Controller User Guide 4.3 System Chapter 4 Global Setting 4.3.1 Log Setting You can choose the way to receive system logs on Log Setting page. These parameters can be configured: Auto Mail Feature, Enable Server and Enable Nvram. Auto Mail Feature If Auto Mail Feature is enabled, system logs will be sent to a specified mailbox. After checking the Auto Mail Feature box, the following screen will appear. Enter the sender's mail address, the receipt's address and the IP address of the SMTP server. You can check the Enable Authentication box to enable mail server authentication. Enter the sender's mail account name and password. System logs can be sent at specific time or time interval. Select Time Mode: Fixation Time: Specify a fixed time to send the system log mails. You can respectively select the hour number and the minute number. 37