Home » TP-Link Manuals » Wireless » TP-Link EAP110 » Manual Viewer

TP-Link EAP110 EAP Controller Software V1 User Guide - Page 9

Mail Server, Device Account - reset

Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

EAP Controller User Guide Chapter 1 System Setup Step 3: Set an SSID name (wireless network name) and password. The EAP Controller will simultaneously create two wireless networks, a 2.4GHz one and a 5GHz one both encrypted in the WPA2-PSK mode. Click Next. Step 4: Configure an admin name and password for login to the EAP Controller. Specify an email address to receive the notification emails and reset your password if necessary. Click Next to continue. NOTE:  Please remember well your password. After logging into the Controller, please set Mail Server on the Controller Settings page so that you can reset the password if necessary.  The configured admin name and password will respectively serve as the username and password of the adopted EAP devices for the first time. You can change the username and password of each EAP device on the Device Account page. 5

Section	Page
Chapter 1 System Setup	5
1.1 System Requirements	5
1.2 Network Topology	5
1.3 Software Installation	6
1.4 Quick Setup	8
Chapter 2 Interface	11
Chapter 3 Monitor	13
3.1 Map Tab	13
3.1.1 Add Custom Maps	13
3.1.2 Set the Map Scale	14
3.1.3 Place APs onto the Map	15
3.2 Statistics Tab	17
3.2.1 View the Client Distribution on SSID	18
3.2.2 Quick Look	18
3.2.3 View Current Usage-Top APs	19
3.2.4 View Recent Activities	19
3.3 Access Points Tab	20
3.4 Clients Tab	22
3.5 Insight Tab	23
3.5.1 Clients Statistics	23
3.5.2 Untrusted Rogue APs	23
Trusted Rogue APs	23
3.6 Log Tab	24
Chapter 4 Global Setting	25
4.1 Wireless Settings	25
4.1.1 Basic Wireless Setting	25
4.1.2 Advanced Wireless Setting	28
4.2 Wireless Control	29
4.2.1 Portal	29
4.2.2 Free Authentication Policy	33
4.2.3 MAC Filter	34
4.2.4 MAC Filter Association	35
4.2.5 Scheduler	36
4.2.6 Scheduler Association	37
4.2.7 QoS	38
4.3 System	41
4.3.1 Log Setting	41
4.3.2 Device Account	42
4.3.3 LED	43
4.3.4 Backup&Restore	43
4.3.5 Batch Upgrade	43
4.3.6 Country/Region	44
4.3.7 About	44
4.4 Admin	44
4.4.1 User Settings	45
4.4.2 Role	46
4.4.3 Controller Settings	47
Chapter 5 AP Details	49
5.1 Details	49
5.1.1 Overview	49
5.1.2 LAN	49
5.1.3 Radio	50
5.2 User	50
5.3 Guest	51
5.4 Configuration	51
5.4.1 Basic Config	51
5.4.2 IP Setting	52
5.4.3 Radio	53
5.4.4 Load Balance	55
5.4.5 SSID Override	55
5.4.6 Rogue AP Detection	56
5.4.7 Forget this AP	57
Chapter 6 Application Example	58
6.1 Map Monitor	58

Match case Limit results 1 per page

EAP Controller

User Guide

Chapter 1 System Setup

Step 3:

Set an SSID name (wireless network name) and password. The EAP Controller will simultaneously

create two wireless networks, a 2.4GHz one and a 5GHz one both encrypted in the WPA2-PSK

mode. Click

Step 4:

Configure an admin name and password for login to the EAP Controller. Specify an email address

to receive the notification emails and reset your password if necessary. Click

to continue.

NOTE:



Please remember well your password. After logging into the Controller, please set

Mail Server

the Controller Settings page so that you can reset the password if necessary.



The configured admin name and password will respectively serve as the username and password of

the adopted EAP devices for the first time. You can change the username and password of each EAP

device on the

Device Account

page.