TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 537

Configuring PoE PoE Power Management Configurations 2) In the Port Config section, select the port you want to configure and specify the parameters. Click Apply. PoE Status Enable or disable the PoE function for on corresponding port. The port can supply power to the PD when its status is enable. PoE Priority Select the priority level for the corresponding port. When the supply power exceeds the system power limit, the switch will power off PDs on low-priority ports to ensure stable running of other PDs. Power Limit (0.1w-30.0w) Specify the maximum power the corresponding port can supply. The following options are provided: Auto: The switch will allocate a value as the maximum power that the port can supply automatically. Class1: The maximum power that the port can supply is 4W. Class2: The maximum power that the port can supply is 7W. Class3: The maximum power that the port can supply is 15.4W. Class4: The maximum power that the port can supply is 30W. Manual: Enter a value manually. Time Range Select a time range, then the port will supply power only during the time range. For how to create a time range, refer to Time Range Function Configurations. PoE Profile A quick configuration method for the corresponding ports. If one profile is selected, you will not be able to modify PoE status, PoE priority or power limit manually. For how to create a profile, refer to Configuring the PoE Parameters Using the Profile. Power(w) Displays the port's real-time power supply. Current(mA) Displays the port's real-time current. Voltage(v) Displays the port's real-time voltage. PD Class Displays the class the linked PD belongs to. Power Status Displays the port's real-time power status. Configuration Guide 510