TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 94

Managing System Access Security Configurations Step 10 end Return to privileged EXEC mode. Step 11 copy running-config startup-config Save the settings in the configuration file. The following example shows how to configure the HTTPS function. Enable SSL3 and TLS1 protocol. Enable the ciphersuite of 3des-ede-cbc-sha. Set the session timeout time as 15; set the maximum admin number as 2, operator number as 2, power user number as 5, and user number as 4. Download the certificate named ca.crt and the key named ca.key from the TFTP server with the IP address 192.168.0.100. Switch#configure Switch(config)#ip http secure-server Switch(config)#ip http secure-protocol ssl3 tls1 Switch(config)#ip http secure-ciphersuite 3des-ede-cbc-sha Switch(config)#ip http secure-session timeout 15 Switch(config)#ip http secure-max-users 2 2 5 4 Switch(config)#ip http secure-server download certificate ca.crt ip-address 192.168.0.100 Start to download SSL certificate...... Download SSL certificate OK. Switch(config)#ip http secure-server download key ca.key ip-address 192.168.0.100 Start to download SSL key...... Download SSL key OK. Switch(config)#show ip http secure-server HTTPS Status: Enabled SSL Protocol Level(s): ssl3 tls1 SSL CipherSuite: 3des-ede-cbc-sha HTTPS Session Timeout: 15 HTTPS User Limitation: Enabled HTTPS Max Users as Admin: 2 HTTPS Max Users as Operator: 2 HTTPS Max Users as Power User: 5 HTTPS Max Users as User: 4 Configuration Guide 67