TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 672

Configuring Network Security Configuration Examples The overview of configuration on the switch is as follows: 1) Globally enable AAA. 1) Add the two RADIUS servers on the switch. 2) Create a new RADIUS server group and add the two servers to the group. Make sure that RADIUS Server 1 is the first server for authentication. 3) Configure the method list. 4) Configure the AAA application list. Demonstrated with T2500G-10MPS, the following sections provide configuration procedure in two ways: using the GUI and using the CLI. 9.3.3 Using the GUI 1) Choose the menu Network Security > AAA > Global Config to load the following page. In the Global Config section, enable AAA and click Apply. Figure 9-17 Global Config 2) Choose the menu Network Security > AAA > RADIUS Server to load the following page. Configure the Server IP as 192.168.0.10, the Shared Key as 123456, the Auth Port as 1812, and keep the other parameters as default. Click Add to add RADIUS Server 1 on the switch. Figure 9-18 Add RADIUS Server 1 3) On the same page, configure the Server IP as 192.168.0.20, the Shared Key as 123456, the Auth Port as 1812, and keep the other parameters as default. Click Add to add RADIUS Server 2 on the switch. Configuration Guide 645