TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 92

Managing System Access Security Configurations Step 7 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the session timeout as 9, set the maximum admin number as 2, operator number as 2, power user number as 5, and user number as 4. Switch#configure Switch(config)#ip http server Switch(config)#ip http session timeout 9 Switch(config)#ip http max-user 2 2 5 4 Switch(config)#show ip http configuration HTTP Status: Enabled HTTP Session Timeout: 9 HTTP User Limitation: Enabled HTTP Max Users as Admin: 2 HTTP Max Users as Operator: 2 HTTP Max Users as Power User: 5 HTTP Max Users as User: 4 Switch(config)#end Switch#copy running-config startup-config 5.2.3 Configuring the HTTPS Function Follow these steps to configure the HTTPS function: Step 1 Step 2 Step 3 configure Enter global configuration mode. ip http secure-server Enable the HTTPS function. By default, it is enabled. ip http secure-protocol { [ ssl3 ] [ tls1 ] } Configure to make the switch support the corresponding protocol. By default, the switch supports SSLv3 and TLSv1. ssl3: Enable the SSL version 3 protocol. SSL is a transport protocol. It can provide server authentication, encryption and message integrity to allow secure HTTP connection. tls1: Enable the TLS version 1 protocol. TLS is s transport protocol upgraded from SSL. It supports different encryption algorithm from SSL, so TLS and SSL are not compatible. TLS can support a more secure connection. Configuration Guide 65