TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 794

Configuring SNMP & RMON Configuration Example statistics entry ID as 2 (bound to port 1/0/2). Other configurations are the same as those of entry 1. Figure 6-11 Alarm Configuration 5) Click Save Config to save settings. 6.5 Using the CLI  Configuring Rate Limit on ports Configure the rate limit on required ports. For detailed configuration, please refer to Configuring QoS.  Configuring SNMP 1) Enable SNMP and specify the remote engine ID. Switch#configure Switch(config)#snmp-server Switch(config)#snmp-server engineID remote 123456789a 2) Create a view with the name View; set the MIB Object ID as 1 (which represents all functions), and the view type as Include. Switch(config)#snmp-server view View 1 include 3) Create a group of SNMPv3 with the name of nms-monitor. Enable Auth Mode and Privacy Mode, and set the view as read View and notify view. Switch(config)#snmp-server group nms-monitor smode v3 slev authPriv read View notify View 4) Create an SNMP user with the name admin. Set the user as a remote user and configure the security mode and security level based on the group. Set the Auth Mode as SHA algorithm, password as 1234, the Privacy Mode as DES, and password as 1234. Switch(config)#snmp-server user admin remote nms-monitor smode v3 slev authPriv cmode SHA cpwd 1234 emode DES epwd 1234 Configuration Guide 767