TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 57

Managing System System Info Configurations Switch(config)#hostname Switch_A Switch(config)#location BEIJING Switch(config)#contact-info http://www.tp-link.com Switch(config)#show system-info System Description - JetStream 8-Port Gigabit L2 Managed PoE+ Switch with 2 SFP Slots System Name - Switch_A System Location - BEIJING Contact Information - http://www.tp-link.com ... Switch(config)#end Switch#copy running-config startup-config 2.2.3 Setting the System Time Follow these steps and choose one method to set the system time: Step 1 Step 2 configure Enter global configuration mode. Use the following command to set the system time manually: system-time manual time Configure the system time manually. time: Specify the date and time manually in the format of MM/DD/YYYY-HH:MM:SS. The valid value of the year ranges from 2000 to 2037. Use the following command to set the system time by getting time from the NTP server: system-time ntp { timezone } { ntp-server } { backup-ntp-server } { fetching-rate } Configure the time zone and the NTP server to get time from the NTP server. Ensure the NTP server is accessible. If the NTP server is on the Internet, connect the switch to the Internet first. timezone: Enter your local time-zone, which ranges from UTC-12:00 to UTC+13:00. Configuration Guide 30