TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 541

Configuring PoE PoE Power Management Configurations Step 8 show power inline configuration interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list }] Verify the PoE configuration of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 9 show power inline information interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list }] Verify the real-time PoE status of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 10 end Return to privileged EXEC mode. Step 11 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the system power limit as 100W. Set the priority as middle and set the power limit as class3 in the port 1/0/5. Switch#configure Switch(config)#power inline consumption 100 Switch(config)#interface gigabitEthernet 1/0/5 Switch(config-if)#power inline supply enable Switch(config-if)#power inline priority middle Switch(config-if)#power inline consumption class3 Switch(config-if)#show power inline System Power Limit: 100.0w System Power Consumption: 0.0w System Power Remain: 100.0w Switch(config-if)#show power inline configuration interface gigabitEthernet 1/0/5 Interface PoE-Status PoE-Prio Power-Limit(w) Time-Range PoE-Profile Gi1/0/5 Enable Middle Class3 No Limit None Configuration Guide 514