TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 539

Configuring PoE PoE Power Management Configurations  Binding the Profile to the Corresponding Ports Choose the menu PoE > PoE Config > PoE Config to load the following page. Figure 2-3 Bind the Profile to the Corresponding Ports Follow these steps to bind the profile to the corresponding ports: 1) In the Global Config section, specify the System Power Limit and click Apply. System Power Limit Specify the maximum power the PoE switch can supply. System Power Consumption Displays the real-time system power consumption of the PoE switch. System Power Remain Displays the real-time system remaining power of the PoE switch. 2) In the Port Config section, select a profile and bind it to the corresponding ports. Click Apply. Port Select Specify the port number and click Select to quick-select the corresponding entry. Only one port can be selected at a time. Time Range Select a time range, then the port will supply power only during the time range. For how to create a time range, refer to Time Range Function Configurations. PoE Profile Select the PoE profile set in the PoE Profile section for the desired port. If one profile is selected, you will not be able to modify PoE status, PoE priority or power limit manually. Power(w) Displays the port's real-time power supply. Current(mA) Displays the port's real-time current. Voltage(v) Displays the port's real-time voltage. PD Class Displays the class the linked PD belongs to. Configuration Guide 512