TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 791

Configuring SNMP & RMON Figure 6-4 SNMP Group Configuration Configuration Example 4) Choose SNMP > SNMP Config > SNMP User to load the following page. Create a user named admin for the NMS, set the user type as Remote User and specify the group name. Set the Security Model and Security Level in accordance with those of the group nms-monitor. Choose SHA authentication algorithm and DES privacy algorithm, and set corresponding passwords. Click Create. Figure 6-5 User Config 5) Choose SNMP > Notification > Notification Config to load the following page. Specify the IP address of the NMS host and the port of the host for transmitting notifications. Set the User, Security Model and Security Level according to configurations of the SNMP User. Choose the type as Inform, and set the retry times as 3, with the timeout period as 100 seconds. Click Create. Figure 6-6 Notification Configuration 6) Click Save Config to save the settings.  Enabling Bandwith-control Trap The feature can be configured only with the CLI. You can enter the following commands under the CLI configuration mode: Switch>enable Enter Privileged EXEC Mode. Switch#config Enter global configuration mode. Configuration Guide 764